My last post was about this very same thing, but I wasn't specific enough and I caused a very nice person, Martin, to spend an aweful lot of time helping me out. Apologies again! Getting down to it. When I boot with the MCE USB receiver plugged in, cat /var/log/messages | grep usb gives me this output:
Mar 12 11:36:41 mythfrontend kernel: usbcore: registered new driver usbfs Mar 12 11:36:41 mythfrontend kernel: usbcore: registered new driver hub Mar 12 11:36:44 mythfrontend kernel: usbcore: registered new driver hiddev Mar 12 11:36:44 mythfrontend kernel: usbcore: registered new driver usbhid Mar 12 11:36:44 mythfrontend kernel: drivers/usb/input/hid-core.c: v2.0:USB HID core driver Mar 12 11:36:45 mythfrontend kernel: usb 3-2: new full speed USB device using ohci_hcd and address 2 I am not sure what settings to put in my modprobe.conf and if I need to edit lircd in /etc/rc.d/init.d/ or not. Here is the pertinent part of my modprobe.conf after I followed some directions at FedoraForum.org (http://fedoraforum.org/forum/showthread.php?t=27829&highlight=ttyUSB0): # LIRC Setup alias char-major-188-0 usbserial options usbserial vendor=0x0471 product=0x0815 alias lirc0 lirc_mceusb install lirc_mceusb ;\ /sbin/modprobe --ignore-install lirc_mceusb Can anyone please point me in the right direction? What am I doing wrong? Here are my system stats: Frontend System: 2500+ Athlon 512MB PC2700 RAM Asus A7N8X-E DLX Mobo Chaintech FX5200 128MB RAM DVD+R drive, Floppy drive MCE USB IR Receiver/Blaster Using Jarod's Guide FC3 running vanilla 2.6.10_770 kernel APT-GET all components (lirc, nvidia drivers, mythtv-suite, etc all done on 3-11-05) Thanks to Jarod for his wonderful guide. Because of him I had a great Mythbox going for months. And thanks to me for mucking it up!!
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
