ok, it needs to be options tuner type
instead of options tuner tuner --- Scott Minneman <[EMAIL PROTECTED]> wrote: > Hmm, looks like 2.6.11 might have changed that. My > modprobe.conf line > looks like > > options bttv card=10,10 tuner=9,9 > > Maybe try changing tuner to bttv in yours? > > I'm running out of ideas here, anyone else know > anything? > > > > John H. wrote: > > >ah, dmesg says > >"unknown parameter: tuner" > > > >Apparently this, in my modprobe.conf, is not ok > >anymore > > > >options tuner tuner=8 debug=0 > > > > > >--- Scott Minneman <[EMAIL PROTECTED]> wrote: > > > > > > > >>Try running the utility I linked to in my last > >>response. It runs > >>through the entire available tuner list, one at a > >>time, so you can check > >>if each one works. It requires xawtv, so emerge > >>that if you haven't > >>already. > >> > >>Speaking of xawtv, what happens when you run that? > > >>Can you change > >>channels? (If you can, and xawtv works correctly, > >>then the problem is > >>not your bttv driver, it's Myth) > >> > >> > >>John H. wrote: > >> > >> > >> > >>>Here is what dmesg says > >>> > >>>dmesg |grep bttv > >>>bttv: driver version 0.9.15 loaded > >>>bttv: using 8 buffers with 2080k (520 pages) each > >>> > >>> > >>for > >> > >> > >>>capture > >>>bttv: Bt8xx card found (0). > >>>bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 11, > >>>latency: 32, mmio: 0xe7004000 > >>>bttv0: detected: Pinnacle PCTV [bswap] [card=39], > >>> > >>> > >>PCI > >> > >> > >>>subsystem ID is bd11:1200 > >>>bttv0: using: Pinnacle PCTV Studio Pro > >>> > >>> > >>[card=52,insmod > >> > >> > >>>option] > >>>bttv0: gpio: en=00000000, out=00000000 > in=00ff4fdf > >>>[init] > >>>bttv0: i2c: checking for MSP34xx @ 0x80... found > >>>bttv0: miro: id=19 tuner=17 radio=fmtuner > >>> > >>> > >>stereo=yes > >> > >> > >>>bttv0: using tuner=17 > >>>bttv0: i2c: checking for MSP34xx @ 0x80... found > >>>bttv0: i2c: checking for TDA9875 @ 0xb0... not > >>> > >>> > >>found > >> > >> > >>>bttv0: i2c: checking for TDA7432 @ 0x8a... not > >>> > >>> > >>found > >> > >> > >>>bttv0: i2c: checking for TDA9887 @ 0x86... not > >>> > >>> > >>found > >> > >> > >>>bttv0: registered device video0 > >>>bttv0: registered device vbi0 > >>>bttv0: registered device radio0 > >>> > >>> > >>> > >>> > >>>--- Scott Minneman <[EMAIL PROTECTED]> wrote: > >>> > >>> > >>> > >>> > >>>>I had the same problem for a while. Turned out > >>>> > >>>> > >>the > >> > >> > >>>>bttv driver wasn't > >>>>detecting my 2 WinTV Go card's tuners correctly. > >>>> > >>>>I figured this out by running dmesg. Scroll up > >>>>until you see lines > >>>>similar to the following: > >>>> > >>>>bttv0: Hauppauge eeprom: model=29440, tuner=? > >>>> > >>>> > >>(-1), > >> > >> > >>>>radio=no > >>>>bttv0: using tuner=9 > >>>> > >>>>Note that on the first line, it's failing to > >>>> > >>>> > >>detect > >> > >> > >>>>a tuner properly. > >>>>To fix this, in the file > >>>>/etc/modules.autoload.d/kernel-2.6 (I run > >>>>Gentoo on a 2.6 kernel, your distro/kernel might > >>>> > >>>> > >>be > >> > >> > >>>>different), I added > >>>>the line > >>>> > >>>>bttv tuner=9,9 > >>>> > >>>>This loads the bttv driver at startup, and tells > >>>> > >>>> > >>it > >> > >> > >>>>that both cards use > >>>>tuner 9. > >>>> > >>>>To figure out what tuner you have, you can go to > > >>>>http://www.mind.lu/~Eyg/ftvco/ and download the > >>>>utility. > >>>> > >>>>Hope this helps. > >>>> > >>>> > >>>> > >>>>John H. wrote: > >>>> > >>>> > >>>> > >>>> > >>>> > >>>>>This just started a few days ago, but for some > >>>>> > >>>>> > >>>>> > >>>>> > >>>>reason, > >>>> > >>>> > >>>> > >>>> > >>>>>mythtv will only show channel 52 on livetv or > >>>>>recordings, despite changing the channel(the > >>>>> > >>>>> > >>number > >> > >> > === message truncated === __________________________________ Do you Yahoo!? Yahoo! Small Business - Try our new resources site! http://smallbusiness.yahoo.com/resources/
_______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
