Since I used apt-get to install lirc and mythtv-suite, I take it that is would be EXTREMELY difficult for me to compile this new driver into lirc especially since I have never compiled anything in my entire life (except for those 2 semesters in college compiling C code that barely worked). As I understand it, mythtv-suite already has the lirc-lib included. Is there a way around all this? Does anyone know? My version of the mce_usb driver is listed as v0.2 but doesn't mention anything about this Dan Conti. Also, on ATRPMs it looks like Axel last updated the lirc drivers on Mar 5th 12:27 CET. Could you tell me how you were able to get your MCE IR receiver up and working (assuming I have the right driver). What did you put in your /etc/modprobe.conf? I didn't have a /dev/lirc0 only a /dev/lircd so in my rc.local I put these statements in:
ln -s /dev/lircd /dev/lirc0 chmod 666 /dev/lirc0 /sbin/modprobe lirc_mceusb /usr/sbin/lircd --device=/dev/lirc0 --output=/dev/lircd Am I incorrect? Should I be doing something different? Thanks! On Sun, 13 Mar 2005 20:20:20 -0800 (PST), Joe Huffner <[EMAIL PROTECTED]> wrote: > Just an FYI for those of us who bought one of the > updated MCE remotes and receivers. I was checking out > the lirc mailing list and someone has update the > driver to include support. From what I can tell the > update has not been updated in CVS. > > I found the info at: > http://search.gmane.org/?query=mce&group=gmane.comp.hardware.lirc > > Basically what I did was overwrite the lirc_mceusb.c > in the drivers/lirc_mceusb directory with the source > found in the mailing liste. (I have attached the new > source file.) Then went through the install process > documented. I used version .7.0 of lirc. > > Please note, from what I have read and experienced, > there are some initialization problems. What seemed to > "fix it" was unplugging the receiver and plugging it > back in, until I no longer got an error message > stating the device did not initialize. You can check > this by running "tail -f /var/log/messages". Also, I > read that running kernel 2.6.11 seemed to fix the > initialization problem. However I cannot confirm this > as I am running Gentoo Dev Kernel 2.6.9-r9. Another > problem I am having is that I am getting non-stop > error messages stating: > > "usb 2-2: bulk timeout on ep1in" > > In fact, I was getting about 4 of those messages per > second. If/when I get time I am planning to upgrade to > 2.6.11 to see if this fixes the issue. > > -joe
_______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users