Should I be able to see the third card from the frontend? Checking the card status in the Information Center, I only see the two 'local' cards - I was expecting to see the status of the slave card as well.
Some searching also turned up that it should add an entry to the Master SQL DB in the cardInput table. This hasn't happened either - which makes me think it may not be working correctly. I was watching LiveTV from the slave box - just to test that the card was functioning correctly. Thanks -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Chris Pinkham Sent: Wednesday, 30 March 2005 3:20 PM To: mythtv-users@mythtv.org Subject: Re: [mythtv-users] Can't see slave card in master > I have an xbox frontend and a master backend with two tuner cards > working just fine. > > Last night, I added a Slave Backend with another card in it - but I > can't see the third card from the Master Backend. > > The card in the slave is working fine - I have set it up in mythtvsetup, > and tuned all the channels and can watch liveTV with it - it connects to > the Master Backend no problems, and the Master Backend accepts the > connection. You don't have to add the card in the slave backend to the setup program on the master backend. If you can Watch LiveTV and know it's using the new card, then everything is working correctly, recordings will use it if you have 3 things recording at the same time. You only add the card in the setup program on the backend the card is physically in. -- Chris
_______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users