On 5/3/05, iwan <[EMAIL PROTECTED]> wrote: > ? > > Hi, > > I am busy setting up MythTV and using this guide: > http://wilsonet.com/mythtv/fcmyth.php > > I am at the point of configuring the drivers for the soundcard. > > I have a soundcard and during my instalation of FC3 the installation allowed > me to test the sound ...and that worked fine. > Does this mean my souncard is ready? > Or do I still need additional drivers? > > I am also looking for the command that can show me what soundcard I have and > what the driver is that is used. > Can someone post that?
Iwan, If you have ALSA installed and you can hear sound, you can use the following commands to get more detailed info on your sound setup: To see which rpms you have installed for ALSA: /bin/rpm -qa |grep alsa |sort To see which drivers/modules are currently in use: /sbin/lsmod |grep snd To see which version of ALSA is installed: cat /proc/asound/version The /proc/asound tree has much useful info about your sound devices. To see which hardware ALSA devices are configured: aplay -l To see which devices and aliases you can use for sound: aplay -L You may need to configure ALSA OSS emulation if you are using a capture device which needs it, otherwise, ensure your mixer settings are suitable (can use alsamixer from the console) and give it a whirl. HTH, Nick _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
