On 5/10/05, Joe Votour <[EMAIL PROTECTED]> wrote: > I don't have the exact same combo, but I do have a > PVR-250 and a PVR-500 working in the same box. > > I'm using Fedora Core 3 (Jarod's guide), and RPMs from > ATrpms. The kernel version is > 2.6.10-1.770_14.rhfc3.at, and the ivtv driver version > is 0.3.3k. > > Portions of my modprobe.conf: > alias char-major-81 videodev > alias char-major-81-0 ivtv > alias char-major-81-1 ivtv > alias char-major-81-2 ivtv > options cx25840 no_black_magic=1 > alias tveeprom tveeprom-ivtv > alias msp3400 msp3400-ivtv > alias tuner tuner-ivtv > install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe > --ignore-install lirc_i2c > Thanks Joe- If I only use the no_black_magic=1 on my setup, only the 350 works. If I use the combination I mentioned earlier, the 350 works, as well as the 2nd tuner of the 500. I get an error ivtv: i2c client addr: 0x44 not found! with tuner 1... I saw this error previously in the pundit-r also... when I cat /dev/video1 > /tmp/test_capture.mpg, I get an error: cat: /dev/video1: Input/output error, and teh corresponding dmesg is : ivtv: i2c client addr: 0x44 not found! ivtv: i2c client addr: 0x44 not found! ivtv: i2c client addr: 0x44 not found! ivtv: Timeout waiting for data! Encoder buffers have 0x00000000 bytes trans_id = 0. ivtv: Check digitizer Sync ivtv: Resetting digitizer ivtv: i2c client addr: 0x44 not found! ivtv: i2c client addr: 0x44 not found! ivtv: Failed reseting digitizer! ivtv: Capture has failed!!! Try again.
my log: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.4 (j) loading ivtv: Linux version: 2.6.8-24.10-default 586 REGPARM gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 350 card ivtv: Found an iTVC15 based chip ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 10 (level, low) -> IRQ 10 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: VIA PCI device: 0x3189 vendor: 0x1106 module tveeprom unsupported by SUSE/Novell, tainting kernel. tveeprom: Hauppauge: model = 48132, rev = K168, serial# = 7520207 tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3440 (type = 11) ivtv: i2c attach [client=tveeprom[50],ok] ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x00ad1598, Revision 0x00000001 ivtv: NTSC tuner detected ivtv: Radio detected module tuner unsupported by SUSE/Novell, tainting kernel. tuner: Ignoring new-style parameters in presence of obsolete ones tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] module saa7115 unsupported by SUSE/Novell, tainting kernel. saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[50],ok] saa7115: status: (1E) 0x48, (1F) 0xc0 module saa7127 unsupported by SUSE/Novell, tainting kernel. saa7127: Ignoring new-style parameters in presence of obsolete ones saa7127: video encoder driver version V 0.3 loaded saa7127: detecting saa7127 client on address 0x88 saa7127: Selecting NTSC video Standard saa7127: Selecting S-Video+Composite saa7127: Turn WSS off saa7127: Widescreen Mode 4:3 Full Format saa7127: Selecting Normal Encoder Input saa7127: Enable Video Output ivtv: i2c attach [client=saa7127[50],ok] module msp3400 unsupported by SUSE/Novell, tainting kernel. msp34xx: ivtv version msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: May 10 2005 07:22:20 ivtv: i2c attach [client=MSP3448W-A2,ok] hdb: ATAPI 52X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache SCSI subsystem initialized st: Version 20040403, fixed bufsize 32768, s/g segs 256 ivtv: Encoder revision: 0x02040011 ivtv: Decoder revision: 0x02020023 ivtv: Configuring WinTV PVR 350 card with 10 streams ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 2 using 40 52224 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Create stream 4 ivtv: Registered v4l2 device, streamtype 5 minor 16 ivtv: Create DMA stream 5 using 16 65536 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 6 minor 228 ivtv: Create DMA stream 6 using 14563 144 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 7 minor 232 ivtv: Create stream 7 ivtv: Registered v4l2 device, streamtype 8 minor 48 ivtv: Create DMA stream 8 using 20 103680 byte buffers 0 kbytes total ivtv: Create DMA stream 9 using 32 65536 byte buffers 0 kbytes total ivtv: Setting Tuner 47 tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0 saa7115: decoder set input (4) saa7115: now setting Composite input ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to NTSC. ivtv: ivtv_enc_thread: pid = 3521, itv = 0xf170d7a0 ivtv: ivtv_dec_thread: pid = 3522, itv = 0xf170d7a0 saa7115: decoder set norm NTSC saa7115: set audio: 0x01 saa7127: Setting Encoder Video Standard saa7127: Set NTSC Video Mode saa7127: Selecting NTSC video Standard ivtv: Initialized WinTV PVR 350, card #0 ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 10 (level, low) -> IRQ 10 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: VIA PCI device: 0x3189 vendor: 0x1106 spurious 8259A interrupt: IRQ7. tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 7855692 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[50],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) saa7127: detecting saa7127 client on address 0x88 saa7127: saa7127 client id: saa7127_i2c_id 1, skipped ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model 0x00914652, Revision 0x00000000 ivtv: NTSC tuner detected ivtv: Radio detected module cx25840 unsupported by SUSE/Novell, tainting kernel. cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) cx25840: client id: cx25840_i2c_id 0, skipped module wm8775 unsupported by SUSE/Novell, tainting kernel. ivtv: i2c attach [client=wm8775[50],ok] ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device, streamtype 0 minor 1 ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 33 ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 225 ivtv: Create DMA stream 2 using 60 34632 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 25 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 65 ivtv: Create stream 4 ivtv: Setting Tuner 57 tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1 ivtv: i2c client addr: 0x44 not found! ivtv: Switching standard to NTSC. ivtv: i2c client addr: 0x44 not found! ivtv: Initialized WinTV PVR 150, card #1 ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ivtv: ivtv_enc_thread: pid = 3639, itv = 0xf17307c0 ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 5 (level, low) -> IRQ 5 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: VIA PCI device: 0x3189 vendor: 0x1106 tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 7855692 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[50],ok] tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #2 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #2 (0x10005) saa7127: detecting saa7127 client on address 0x88 saa7127: saa7127 client id: saa7127_i2c_id 2, skipped cx25840: starting probe for adapter ivtv i2c driver #2 (0x10005) cx25840: detecting client on address 0x88 cx25840: writing init values cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 cx25840: Status: cx258433 (DEVICE_ID) ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] ivtv: Tuner Type 57, Tuner formats 0x00001000, Radio: yes, Model 0x00914652, Revision 0x00000000 ivtv: NTSC tuner detected ivtv: Radio detected ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device, streamtype 0 minor 2 ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 34 ivtv: Create DMA stream 1 using 20 103680 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 226 ivtv: Create DMA stream 2 using 60 34632 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 26 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 66 ivtv: Create stream 4 ivtv: Setting Tuner 57 tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #2 cx25840: decoder set input (6) cx25840: Tuner Input cx25840: set audio: 0x01 ivtv: Switching standard to NTSC. cx25840: decoder set norm NTSC cx25840: set audio: 0x01 ivtv: Initialized WinTV PVR 150, card #2 ivtv: ==================== END INIT IVTV ==================== Suggestions anyone? Thanks, Mike _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
