On 5/23/05, Brad Fuller <[EMAIL PROTECTED]> wrote: > > > Michael Haan wrote: > I'm not sure I'm doing this right. I have the card installed, > running 2.6.12-rc4. The drivers seem to load as does the firmware. > I've built dvb-apps and tried:
./atscscan > atsc/us-NTSC-center-frequencies-8VSB And got nothing > but: > > tune to: 803000000:8VSB > WARNING: >>> tuning failed!!! > > tune to: 803000000:8VSB (tuning failed) > WARNING: >>> tuning failed!!! Does that mean there are no QAM channels I > can get? Or do I need to do something more? What about 64 vs 256? > I haven't connected by hd-3000 yet, so I'll follow this thread. > But, VSB is a different modulation method than QAM. Are you trying to > connect your card to cable? > If you are, why not connect to an antenna first and try to tune to > terrestrial VSB broadcasts in your area? > No, I was fumbling about trying to get QAM. It looks like the driver is loaded (along with VSB): or51132: Waiting for firmware upload(dvb-fe-or51132-qam.fw)... or51132: Version: 10001334-17430000 (133-4-174-3) or51132: Firmware upload complete. or51132: Waiting for firmware upload(dvb-fe-or51132-vsb.fw)... or51132: Version: 10001134-19430000 (113-4-194-3) or51132: Firmware upload complete. I guess what I'm really trying to do is take the next step and verify that my card is working, and tune a channel (any channel). _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users