Ok, I seeming have done all the neccessary things to get it up and running. However, when I go to watch tv all i get is noise. I know the cable is good (tested on the tv) so what do I do next? thank you for your help
here is my set_ivtv_params: [EMAIL PROTECTED]:~# more /etc/init.d/set_ivtv_params /usr/local/bin/ivtvctl -d /dev/video0 -u 0x3000 -f width=720,height=480 -p 6 /usr/local/bin/ivtvctl -d /dev/video0 -c dnr_mode=0,dnr_temporal=4,dnr_spatial=4 /usr/local/bin/ivtvctl -d /dev/video0 -x 0 /usr/local/bin/ivtvctl -d /dev/video1 -u 0x3000 -f width=720,height=480 -p 6 /usr/local/bin/ivtvctl -d /dev/video1 -c dnr_mode=0,dnr_temporal=4,dnr_spatial=4 /usr/local/bin/ivtvctl -d /dev/video1 -x 0 here is my module/ivtv: [EMAIL PROTECTED]:~# more /etc/mythtv/modules/ivtv alias char-major-81 videodev alias char-major-61 lirc_i2c #options ivtv debug=1 #options tuner type=2 options msp3400 once=1 simple=1 install ivtv /sbin/modprobe tuner; /sbin/modprobe msp3400; /sbin/modprobe saa7115; /sbin/modprobe --ignore-install ivtvremove ivtv /sbin/modprobe -r --ignore-remove ivtv && /sbin/modprobe -r saa7115 && /sbin/modprobe -r msp3400 && /sbin/modprobe -r tuner alias char-major-81-0 ivtv alias char-major-81-1 ivtv my dmesg: ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.5 (t) loading ivtv: Linux version: 2.6.11.9-chw-2 SMP preempt 586 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: VIA PCI device: 0x3116 vendor: 0x1106 tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) tveeprom: Hauppauge: model = 26552, rev = B268, serial# = 7954869 tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[50],ok] ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x00892598, Revision 0x00000001 ivtv: NTSC tuner detected ivtv: Radio detected cx25840: starting probe for adapter SMBus Via Pro adapter at 5000 (0x0) cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) cx25840: detecting cx25840 client on address 0x88 cx25840: writing init values cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 cx25840: Status: cx258433 (DEVICE_ID) ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create DMA stream 1 using 80 25920 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 2 using 165 12635 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Create stream 4 ivtv: Setting Tuner 47 tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0 cx25840: decoder set norm NTSC cx25840: decoder set input (6) cx25840: now setting Tuner input cx25840: set audio input (0) ivtv: Switching standard to NTSC. ivtv: Initialized WinTV PVR 150, card #0 ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: VIA PCI device: 0x3116 vendor: 0x1106 tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) tveeprom: Hauppauge: model = 26552, rev = B268, serial# = 7954696 tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[50],ok] cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) cx25840: detecting cx25840 client on address 0x88 cx25840: writing init values ivtv: ivtv_enc_thread: pid = 2745, itv = 0xe0bdf3a0 ivtv: ivtv_enc_vbi_thread: pid = 2746, itv = 0xe0bdf3a0 cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 cx25840: Status: cx258433 (DEVICE_ID) ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x00892598, Revision 0x00000001 ivtv: NTSC tuner detected ivtv: Radio detected ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device, streamtype 0 minor 1 ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 33 ivtv: Create DMA stream 1 using 80 25920 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 225 ivtv: Create DMA stream 2 using 165 12635 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 25 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 65 ivtv: Create stream 4 ivtv: Setting Tuner 47 tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #1 cx25840: decoder set norm NTSC cx25840: decoder set input (6) cx25840: now setting Tuner input cx25840: set audio input (0) ivtv: Switching standard to NTSC. ivtv: Initialized WinTV PVR 150, card #1 ivtv: ==================== END INIT IVTV ==================== cx25840: decoder set size 720x480 (from 720x480) -> scale 0x65536, filter 0 ivtv: Sliced VBI not supported for cx25840 so no vbi re-insertion possible yet ivtv: ivtv_enc_thread: pid = 2811, itv = 0xe0c026e8 ivtv: ivtv_enc_vbi_thread: pid = 2812, itv = 0xe0c026e8 cx25840: decoder set size 720x480 (from 720x480) -> scale 0x65536, filter 0 ivtv: Sliced VBI not supported for cx25840 so no vbi re-insertion possible yet ts: Compaq touchscreen protocol output cx25840: decoder disable output cx25840: decoder set input (7) cx25840: now setting Tuner input cx25840: decoder enable output cx25840: decoder set norm NTSC cx25840: decoder set input (7) cx25840: now setting Tuner input cx25840: set audio input (0) input: PC Speaker ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A cpci_hotplug: CompactPCI Hot Plug Core version: 0.2 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5 natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002 originally by Donald Becker <[EMAIL PROTECTED]> http://www.scyld.com/network/natsemi.html 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 16 natsemi eth1: NatSemi DP8381[56] at 0xe7000000 (0000:00:08.0), 00:a0:cc:a0:bf:1b, IRQ 16, port TP. ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:00:10.3: irq 21, pci mem 0xe7001000 ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected NET: Registered protocol family 23 nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7174 Tue Mar 22 06:44:39 PST 2005 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode eth1: DSPCFG accepted after 0 usec. eth1: link up. eth1: no IPv6 routers present cx25840: decoder set size 480x480 (from 720x480) -> scale 524288x65536, filter 0 ivtv: Sliced VBI not supported for cx25840 so no vbi re-insertion possible yet ivtv: Allocate DMA stream 0 using 128 16384 byte buffers 2097152 kbytes total ivtv: Setup VBI API header 0x0000bd0c pkts 1 buffs 48 ln 2 sz 72 ivtv: Setup VBI start 0x0018ea04 frames 48 fpi 1 lines 0x00000140 cx25840: decoder disable output cx25840: decoder enable output cx25840: decoder set norm NTSC cx25840: decoder set input (6) cx25840: now setting Tuner input cx25840: set audio input (0)
_______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users