On 6/29/05, PAUL WILLIAMSON <[EMAIL PROTECTED]> wrote: > > >>> [EMAIL PROTECTED] 06/28/05 7:33 PM >>> > > George Nassas wrote: > > > > > On 28-Jun-05, at 5:31 PM, Pane, Chris wrote: > > > > > > Does the myth back end support more than 1 Tuner card > > > (Specifically PVR 250. I am thinking >about buying an extra, > > > thus have 2 capture cards on my back end > > > > > > The backend supports this. I recall one guy on this list having > > > 4 or 6 in one backend! > > > I know there's more than one guy. :) I'm one of the guys with 4 > > in one backend. PVR-x50 setup with the 0.2.x or 0.3.x releases > > is just as easy with 1 or more cards. > > > > Took more time to configure Myth than the cards. I already had > > one PVR-250 installed and working, so I just plugged in the other > > three and the hardware worked. Then, I went into mythtv-setup > > and configured the cards and video sources in Myth and was up > > and running. I recommend taking this approach--get one working > > and then add additional cards--it will minimize the possible sources > > > of confusion. > > > > Mike > > I definitely agree with Mike. Get one card working, then another > one. Do one at a time. I have two cards (150 and 250) in one > backend, and they more or less work correctly.
Thirded, even if the cards are different (prob more important in this case) > My problem is that I can't seem to get a non-master backend > connected to my master backend so I can get 2 more 250s > and a pcHD3000 working. What problems are you having? Could be mysql is not allowing the connection from the slave to the backend? Nick _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users