On 7/3/05, Wendy Seltzer <[EMAIL PROTECTED]> wrote: > At 01:51 PM 7/3/2005 -0600, Chad wrote: > > >So, to recap: > >with the atsc module I get a video, but no audio and I can't switch > >channels. With the dvb module, I appear to get everything configured > >correctly, but get nothing. > > With the dvb-based modules, the card has to load the frontend firmware, > e.g. from /usr/lib/hotplug/firmware/ . In one of my setups, I found it > didn't load the firmware until I ran the mythtv-setup channel scan for the > first time. Check your dmesg for something like this: > > $ dmesg > ... > cx2388x dvb driver version 0.0.4 loaded > ACPI: PCI Interrupt 0000:02:09.2[A] -> GSI 21 (level, low) -> IRQ 21 > cx88[0]/2: found at 0000:02:09.2, rev: 5, irq: 21, latency: 64, mmio: > 0xf6000000 > cx88[0]/2: cx2388x based dvb card > DVB: registering new adapter (cx88[0]). > DVB: registering frontend 0 (pcHDTV HD3000 HDTV)... > or51132: Waiting for firmware upload(dvb-fe-or51132-vsb.fw)... > or51132: Version: 10001134-19430000 (113-4-194-3) > or51132: Firmware upload complete. > > I've found little difference between the dvb and v4l, but I think the > dvb-based code will have more support in the future, as that's where more > developers seem to be working. > > --Wendy > > --
Excellent, thank you! _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
