What does the line "saa7127: Ignoring new-style parameters in presence of obsolete ones"
indicate? I assume it means there's some parameter I think I'm setting which is being ignored but I don't know "new-style" from obsolete so where do I find the parameter syntax and where should I start looking for the old format ones? I'm also suspicious of "ivtv: i2c client addr: 0x44 not found for command 0x40046502!" on the final line for the PVR-350 Jim
Latest update: So, I started undoing some of the changes I had made (one at a time) and I got the first one undone with some success. I had replaced /etc/init.d/set_ivtv_params with a simpler script that I had seen elsewhere and when I put back the original (always save what you change out) I now have both the 150 and 350 tuners working in live tv and changing channels! i have two tuners actually able to record independently! Amazing 8^) So, the next piece of work is to get the LIRC working again. Anyone see anything in here? ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.6 (y) loading ivtv: Linux version: 2.6.11.9-chw-2 SMP preempt 586 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 5 ACPI: PCI interrupt 0000:01:07.0[A] -> GSI 5 (level, low) -> IRQ 5 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x01e0 vendor: 0x10de tveeprom: Hauppauge: model = 26032, rev = C199, serial# = 8002732 tveeprom: tuner = TCL 2002N 5H (idx = 99, type = 50) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = TDA9850 (type = 3) ivtv: i2c attach [client=tveeprom[50],ok] ivtv: i2c attach [client=(tuner unset),ok] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) ivtv: Tuner Type 50, Tuner formats 0x00001000, Radio: yes, Model 0x008d1659, Revision 0x00000000 ivtv: NTSC tuner detected ivtv: Radio detected cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) cx25840: detecting cx25840 client on address 0x88 cx25840: cx25841-23 found. Initializing... cx25840: requesting /lib/modules/HcwMakoA.ROM cx25840: firmware loaded ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device for encoder MPEG minor 0 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Registered v4l2 device for encoder YUV minor 32 ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total) ivtv: Registered v4l2 device for encoder VBI minor 224 ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total) ivtv: Registered v4l2 device for encoder PCM audio minor 24 ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) ivtv: Registered v4l2 device for encoder radio minor 64 ivtv: Create encoder radio stream ivtv: Setting Tuner 50 tuner 2-0061: type set to 50 (TCL 2002N) cx25840: decoder set norm NTSC cx25840: decoder set input (6) cx25840: now setting Tuner input cx25840: set audio input (0) ivtv: ivtv_enc_thread: pid = 2190, itv = 0xf9215620 ivtv: ivtv_enc_vbi_thread: pid = 2191, itv = 0xf9215620 ivtv: Switching standard to NTSC. cx25840: decoder set norm NTSC ivtv: Initialized WinTV PVR 150, card #0 ivtv: Autodetected WinTV PVR 350 card ivtv: Found an iTVC15 based chip ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11 ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 11 (level, low) -> IRQ 11 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: XXX PCI device: 0x01e0 vendor: 0x10de tveeprom: Hauppauge: model = 48132, rev = K168, serial# = 2947528 tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3440 (type = 11) ivtv: i2c attach [client=tveeprom[50],ok] ivtv: i2c attach [client=(tuner unset),ok] tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1) msp34xx: ivtv version msp34xx: init: chip=MSP3448W-A2, has NICAM support, simple (D) mode, simpler (G) no-thread mode msp34xx: $Id$ compiled on: Jul 10 2005 12:26:39 ivtv: i2c attach [client=MSP3448W-A2,ok] saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) saa7115: detecting saa7115 client on address 0x42 saa7115: writing init values ivtv: i2c attach [client=saa7115[50],ok] saa7115: status: (1E) 0x01, (1F) 0xc0 cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) cx25840: detecting cx25840 client on address 0x88 cx25840: client id: cx25840_i2c_id 1, skipped ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x00ad1598, Revision 0x00000001 ivtv: Radio detected saa7127: Ignoring new-style parameters in presence of obsolete ones saa7127: video encoder driver version V 0.3 loaded saa7127: detecting saa7127 client on address 0x88 saa7127: saa7127 client id: saa7127_i2c_id 0, skipped ivtv: Encoder revision: 0x02040011 ivtv: Decoder revision: 0x02020023 ivtv: Configuring WinTV PVR 350 card with 10 streams ivtv: Registered v4l2 device for encoder MPEG minor 1 ivtv: Create DMA encoder MPEG stream: 0 x 32768 buffers (0KB total) ivtv: Registered v4l2 device for encoder YUV minor 33 ivtv: Create DMA encoder YUV stream: 0 x 10800 buffers (0KB total) ivtv: Registered v4l2 device for encoder VBI minor 225 ivtv: Create DMA encoder VBI stream: 0 x 8736 buffers (0KB total) ivtv: Registered v4l2 device for encoder PCM audio minor 25 ivtv: Create DMA encoder PCM audio stream: 0 x 4608 buffers (0KB total) ivtv: Registered v4l2 device for encoder radio minor 65 ivtv: Create encoder radio stream ivtv: Registered v4l2 device for decoder MPEG minor 17 ivtv: Create DMA decoder MPEG stream: 0 x 65536 buffers (0KB total) ivtv: Registered v4l2 device for decoder VBI minor 229 ivtv: Create DMA decoder VBI stream: 0 x 2048 buffers (0KB total) ivtv: Registered v4l2 device for decoder VOUT minor 233 ivtv: Create decoder VOUT stream ivtv: Registered v4l2 device for decoder YUV minor 49 ivtv: Create DMA decoder YUV stream: 0 x 43200 buffers (0KB total) ivtv: Create DMA decoder OSD stream: 0 x 65536 buffers (0KB total) ivtv: Setting Tuner 47 tuner 3-0061: type set to 47 (LG NTSC (TAPE series)) saa7115: decoder set norm NTSC saa7115: set audio: 0x01 saa7115: decoder set input (4) saa7115: now setting Composite input ivtv: Setting audio matrix to input 3, output 1 ivtv: Switching standard to NTSC. ivtv: ivtv_enc_thread: pid = 2288, itv = 0xf9238a1c ivtv: ivtv_enc_vbi_thread: pid = 2289, itv = 0xf9238a1c ivtv: ivtv_dec_thread: pid = 2290, itv = 0xf9238a1c ivtv: ivtv_dec_vbi_thread: pid = 2291, itv = 0xf9238a1c saa7115: decoder set norm NTSC saa7115: set audio: 0x01 ivtv: i2c client addr: 0x44 not found for command 0x40046502! ivtv: Initialized WinTV PVR 350, card #1 ivtv: ==================== END INIT IVTV ==================== _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users