On 7/25/05, Jason Mcmillon <[EMAIL PROTECTED]> wrote: > Kudos to the MythTV developers. Excellent work on a great piece of software. > > Now on to my problem. I have successfully installed a PVR 250 using > Jarod's guide on an Asus P4P800-E motherboard with a NVidia FX 5500 > video card. > > I am trying to add an additional software based Hauppauge WinTV card > with no luck. > > /sbin/lspci -v shows: > ... > 02:09.0 Multimedia video controller: Internext Compression Inc iTVC16 > (CX23416) > MPEG-2 Encoder (rev 01) > Subsystem: Hauppauge computer works Inc. WinTV PVR 250 > Flags: bus master, medium devsel, latency 64, IRQ 201 > Memory at f0000000 (32-bit, prefetchable) [size=64M] > Capabilities: [44] Power Management version 2 > > 02:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video > Capture ( > rev 11) > Subsystem: Hauppauge computer works Inc. WinTV Series > Flags: bus master, medium devsel, latency 64, IRQ 11 > Memory at f7efe000 (32-bit, prefetchable) [size=4K] > Capabilities: [44] Vital Product Data > Capabilities: [4c] Power Management version 2 > > 02:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev > 11 > ) > Subsystem: Hauppauge computer works Inc. WinTV Series > Flags: bus master, medium devsel, latency 64, IRQ 11 > Memory at f7eff000 (32-bit, prefetchable) [size=4K] > Capabilities: [44] Vital Product Data > Capabilities: [4c] Power Management version 2 > > ll /dev/video? shows: > > crw------- 1 mythtv root 81, 0 Jul 24 09:55 /dev/video0 > > The WinTV card was autoinstalled under Fedora and my > /etc/modprobe.conf now looks like: > ... > # nvidia kernel module > alias char-major-195 nvidia-1_0-7667 > alias nvidia nvidia-1_0-7667 > > # ivtv modules setup > alias char-major-81-0 ivtv > alias tveeprom tveeprom-ivtv > alias msp3400 msp3400-ivtv > install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-install lirc_i2c > alias char-major-81 bttv > > I have tried both "alias char-major-81 bttv" and "alias > char-major-81-1 bttv" with no luck. > > BTW, running "/sbin/depmod -a" followed by "/sbin/modprobe bttv" > yields the following error: > FATAL: Error inserting bttv > (/lib/modules/2.6.11-1.35_FC3smp/kernel/drivers/media/video/bttv.ko): > Unknown symbol in module, or unknown parameter (see dmesg) > > I am pretty new to linux, and was hoping someone could point me in the > right direction on how to get my two cards to play well together.
You should be able to get them both working. I had 2 bttv cards inmy system until I swapped them for DVB-T cards which is why it's commeneted out in my modprobe.conf below. I think you may need to add an option line to tell it which card ID it is and the tuner number to use - do a search to find those numbers for this card. Hope it helps... ### Packard Bell serial port ir remote alias char-major-61 lirc_serial #options lirc_serial irq=4 io=0x3f8 #install lirc_serial /bin/setserial /dev/ttyS0 uart none ; # /sbin/modprobe --ignore-install lirc_serial ### PixelView ir remote #alias char-major-61 lirc_gpio ###pre-install lirc_gpio modprobe -k lirc_dev #----Network card----# alias eth0 e100 #----Sound----# alias char-major-116 snd alias char-major-14 soundcore options snd snd_major=116 snd_cards_limit=1 # On-board intel sound card alias snd-card-0 snd-intel8x0 alias sound-slot-0 snd-intel8x0 options snd-intel8x0 index=0 install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 && /usr/sbin/alsactl restore >/dev/null 2>&1 || : remove snd-intel8x0 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-intel8x0 ###install snd-cmipci /sbin/modprobe --ignore-install snd-cmipci && /usr/sbin/alsactl restore >/dev/null 2>&1 || : ###remove snd-cmipci { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-cmipci #----USB----# #alias usb-controller ehci-hcd #alias usb-controller1 uhci-hcd # i2c #alias char-major-88 i2c-dev alias char-major-89 i2c-dev options i2c-core options i2c algo bit bit_test=1 #----bttv----# ###alias char-major-81 videodev ###alias char-major-81-0 bttv ###alias char-major-81-1 bttv #options bttv card=37 radio=0 tuner=28 chroma_agc=1 combfilter=2 ###options bttv card=55,37 radio=0 tuner=0,28 chroma_agc=1 combfilter=2 # nvidia kernel module alias char-major-195 nvidia-1_0-7664 alias nvidia nvidia-1_0-7664 _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users