This is my ~/.lircrc (and ~/.mythtv/lircrc): ---------------------------------------------
# XMMS settings begin button = VOL+ prog = xmms config = next end begin button = FULLSCREEN prog = xmms config = play end begin button = VOL- prog = xmms config = prev end begin button = SOURCE prog = xmms config = pause end begin button = MINIMIZE prog = xmms config = stop end begin button = 6 prog = xmms config = fwd 3 end begin button = 4 prog = xmms config = bwd 3 end # MPLAYER settings begin button = VOL+ prog = mplayer config = volume 1 repeat = 2 end begin button = VOL- prog = mplayer config = volume -1 repeat = 2 end begin button = FULLSCREEN prog = mplayer repeat = 3 config = play end begin button = 4 prog = mplayer repeat = 3 config = seek -30 end begin button = 6 prog = mplayer repeat = 3 config = seek +30 end begin button = 5 prog = mplayer repeat = 3 config = pause end begin button = TV prog = mplayer repeat = 3 config = quit end begin button = STOP prog = mplayer repeat = 3 config = seek 0 1\npause end begin button = SOURCE prog = mplayer repeat = 3 config = osd end # # MYTHTV settings # begin prog = mythtv button = 4 repeat = 3 config = Left end begin prog = mythtv button = 6 repeat = 3 config = Right end begin prog = mythtv button = 2 repeat = 3 config = Up end begin prog = mythtv button = 8 repeat = 3 config = Down end begin prog = mythtv button = 0 repeat = 3 config = 0 end begin prog = mythtv button = MINIMIZE repeat = 3 config = M end begin prog = mythtv button = RESERVED repeat = 3 config = I end begin prog = mythtv button = TV repeat = 5 config = Esc end begin prog = mythtv button = 5 repeat = 5 config = Enter end begin prog = mythtv button = MUTE repeat = 3 config = P end begin prog = mythtv button = SOURCE repeat = 3 config = O end begin prog = mythtv button = 6 repeat = 3 config = > end begin prog = mythtv button = 4 repeat = 3 config = < end begin prog = mythtv button = RADIO repeat = 3 config = + end begin prog = mythtv button = VOL+ repeat = 3 config = F11 end begin prog = mythtv button = VOL- repeat = 3 config = F10 end ### Xine lirc setup begin prog = xine button = VOL+ repeat = 1 config = Volume+ end begin prog = xine button = VOL- repeat = 1 config = Volume- end begin prog = xine button = FULLSCREEN repeat = 3 config = Play end begin prog = xine button = TV repeat = 5 config = Quit end begin prog = xine button = MUTE repeat = 3 config = Pause end begin prog = xine button = 2 repeat = 3 config = EventUp end begin prog = xine button = 8 repeat = 3 config = EventDown end begin prog = xine button = 4 repeat = 3 config = EventLeft end begin prog = xine button = 6 repeat = 3 config = EventRight end begin prog = xine button = FULLSCREEN repeat = 3 config = EventSelect end begin prog = xine button = 6 repeat = 3 config = SeekRelative+60 end begin prog = xine button = 4 repeat = 3 #config = SpeedSlower config = SeekRelative-60 end begin prog = xine button = 5 repeat = 5 config = SpeedReset #config = SeekRelative-60 end begin prog = xine button = RESERVED repeat = 3 config = RootMenu end begin prog = xine button = 9 repeat = 3 config = EventNext end begin prog = xine button = 7 repeat = 3 config = EventPrior end begin prog = xine button = CH+ repeat = 3 config = AudioChannelNext end begin prog = xine button = CH- repeat = 3 config = AudioChannelPrior end begin prog = xine button = SOURCE repeat = 3 config = OSDStreamInfos end Zitat von Paul Archer <[EMAIL PROTECTED]>: > Can you post relevent logs (output from mythfrontend and the like) and your > lircrc? Have you figured out which keys get passed, and which don't? > > Paul Archer > > > 10:32am, Mark Schuren wrote: > > > is there really nobody out there who has the same effects with lirc? > > > > i have mandriva 2005 le, with unmodified kernel, i just installed > > the nvidia 7667 drivers and then compiled mythtv from 0.18.1 sources - > > no problems. i have two different machines showing the same issue :-( > > > > i understood that the behaviour is not what it should be like > > (mythfrontend should block receiving lirc events when it launches > > a video/dvd player app like mplayer or xine). But on both of my systems > > the problems described below are happening almost every time i use > > mythdvd or mythvideo :-( > > > > Is it likely that a CVS version of myth will help? > > > > What else should I try next? > > > > Updating/recompiling lirc did not help. > > > > Is anyone using mythtv/xine/mplayer/lirc on mandriva 2005 (2.6.11-6mdk) > > without any flaws using a remote control? Should I invest the time to > > build a new stock kernel from kernel.org? > > > > Please give me an advice, I'm so frustrated. > > > > thanks in advance! > > > > Mark Schuren wrote: > >> lots of thanks your in-depth answers! > >> unfortunately nothing helps it. any more hints? > >> > >> "Michael T. Dean" <[EMAIL PROTECTED]> wrote: > >> > >> > >>> Mark Schuren wrote: > >>> > >>> > >>>> so i think i have tried everything, replaced lirc, replaced the player > >>>> application, recompiled mythtv. but problem is still exactly the same. > >>>> so i guess it is a problem of mythfrontend... > >>>> > >>> > >>> No. Works for me. > >>> > >>> > >>>> or just a faulty configuration > >>>> > >>> > >>> Probably. > >> > >> > >> i also think so but what am i missing?? > >> > >> > >>>> because i use the same lirc button for several actions > >>>> in different programs...? > >>>> > >>>> > >>> > >>> But not for that reason--every remote button I use in xine is also mapped > >>> to an action in Myth, and I don't have any problems. > >> > >> > >> this gives me hope. are you using a cvs myth version? i'm using the > >> release from mythtv.org. > >> > >> > >>>> again, the apps perfectly work with lirc when run stand-alone. > >>>> > >>>> but when a player like xine or mplayer (i tried both) is started through > >>>> mythvideo, all lirc-buttons which i press (and which are intended to be > >>>> only received by the player - and are actually received by the player > >>>> correctly) are also received by mythfrontend, after the player quits... > >>>> > >>>> > >>> > >>> Yes. This is the correct behavior for LIRC--except they should be > >>> received /while/ the player is executing. Upon receipt of a button > >>> press, > >>> LIRC *always* broadcasts the requested string to *all* registered > >>> clients. > >>> It's up to the client to know when to handle it and when to ignore it. > >>> Programs like xine always handle it. Programs like Myth--ones that start > >>> other programs--have to decide whether to ignore it. > >> > >> > >> that's why i post my questions here, because i assumed that lirc was > >> behaving normally. little correction to my statement above: i found out > >> that it's not ALL key-presses, but SOME key-presses, read below. > >> > >> > >>>> is there any means to let mythfrontend ignore lircd events as > >>>> long as an external player is running? > >>>> > >>> > >>> Yeah. You just need some code like > >>> http://cvs.mythtv.org/trac/browser/trunk/mythtv/libs/libmyth/util.cpp > >>> lines 797-799. Oh, wait. It's already there. ;) > >> > >> > >> since i am not a programmer (more a script kiddie) i don't know where > >> to put these lines nor what exactly they do ;-) > >> > >> > >>>> or do i have a "focus" problem? > >>>> > >>>> > >>> > >>> No. LIRC always broadcasts to all clients, so when using MythTV's native > >>> LIRC support, focus problems won't make any difference. If you were > >>> using > >>> irxevent (and not native LIRC support), focus problems would result in > >>> only one--the wrong--app receiving the button press events. > >> > >> > >> ok good. i realized that lirc is also working with my apps when > >> they are not in focus. > >> > >> > >>>> also i am still wondering if my lirc config is good: > >>>> > >>>> > >>>> > >>>>>>> begin > >>>>>>> prog = mythtv > >>>>>>> button = OFF > >>>>>>> config = Esc > >>>>>>> end > >>>>>>> > >>>>>>> begin > >>>>>>> prog = xine > >>>>>>> button = OFF > >>>>>>> config = Quit > >>>>>>> end > >>>>>>> > >>>> > >>>> the above means that i use the same button on my remote ("OFF") for > >>>> 2 different things. it is on the one hand used to quit xine (if running), > >>>> and also used as the escape key for mythtv (if running). > >>>> > >>>> > >>> > >>> That's perfectly fine. Very close to what I use. > >> > >> > >> also gives hope. > >> > >> > >>>> and this is what happens, if i press the "OFF" button, xine terminates > >>>> as expected, and AFTERWARDS also mythfrontend reacts and leaves the > >>>> current > >>>> menu (because it also receives the "escape")... > >>>> > >>> > >>> That's the part that doesn't make sense... If it were a problem of Myth > >>> not ignoring LIRC button press events, it should be happening while > >>> you're > >>> watching the video--not after. > >> > >> > >> i understand, but it's happening on both of myth systems AFTER > >> closing the player. irxevent isn't there, see below. > >> > >> > >>>> maybe this is just "working > >>>> as designed" and i have to get a remote with more keys on it? > >>>> > >>>> > >>> > >>> Nope. Something is wrong with your config--probably buried deep down > >>> within... > >> > >> > >> sounds too bad. "deep" sounds like "unfindable" :-( > >> > >> > >>>> if i should provide any more info please let me know. > >>>> > >>>> i have no more idea what to try next, please advise! is what i what to do > >>>> impossible? is anyone else using lirc buttons for more than one > >>>> application > >>>> at once (esp. the mythtv/xine/mplayer combo)? > >>>> > >>>> > >>> > >>> Wild guess... Do you by any chance have a player command that > >>> backgrounds > >>> xine (i.e. ends with "&")? Perhaps the "xine" command being executed is > >>> a script that sets up the environment and calls the xine executable with > >>> the specified options and backgrounds the process. > >> > >> > >> no. > >> > >> "# ps ax | grep xine" during play (started via myth) gives me > >> 29413 ? SLl 0:03 xine -D -pfhq --auto-scan dvd > >> 29420 ? Ss 0:00 xine -D -pfhq --auto-scan dvd > >> > >> so no background process i guess. > >> > >> > >>> What happens when you play a video through MythVideo using only your > >>> keyboard? Do you get similar behavior? > >> > >> > >> nope. using the keyboard works perfectly fine, no doubled keystrokes > >> or alike. not even when i alt-tab to mythfrontend during xine playback > >> and press esc for 10 times and close the player afterwards... > >> > >> > >>> Or, is it impossible to control xine using the keyboard when started > >>> through Myth without Alt-Tab'ing to the xine window first (focus > >>> problem)? > >>> If so, it's probably irxevent (keep reading...). > >> > >> > >> nope. using the keyboard when not in focus does not work, using lirc when > >> not in focus works. > >> > >> > >> > >>> You said that irxevent is not running. How sure are you? > >> > >> > >> "# ps ax | grep irx" gives me nothing. i have no need for irxevent. > >> > >> > >>> Backup your ".lircrc"/"lircrc" file and remove all the irxevent configs > >>> just to make sure (it's possible it's being started by something else). > >> > >> > >> done, to be very sure. but doesn't change anything. > >> > >> Because the > >>> events are occurring after xine exits, it seems this is the most > >>> plausible > >>> reason for this behavior--you have a focus problem that sends keys to > >>> Myth, but because Myth is blocked waiting for xine to exit, the events > >>> are > >>> populated on the X event queue. Since the keys are getting into the > >>> queue > >>> after you use the remote, someone started irxevent--which is sending keys > >>> to Myth. Then, when xine exits, Myth processes the queued X events, > >>> giving the behavior you're seeing. > >> > >> > >> that was also my first thought but - sorry - irxevent is not involved. > >> > >> > >>>> any help is appreciated! > >>>> > >>>> > >>> > >>> If nothing else, I hope this helps you to narrow your search so you're > >>> not > >>> chasing non-existant bugs... > >> > >> > >> i had mythtv up to 0.18.0 running perfectly without these gliches on > >> my old mandrake 10.0 system, and i'm out of ideas now. i believe you > >> that it's probably not a myth bug... but i'm still out of ideas. > >> > >> It happens on both of my boxes at home regardless of the type of > >> remote (one has a hauppauge wintv remote,i2c), the other one a > >> recycled yamaha cd player remote, serial), regardless of the player > >> application i use in with mythdvd/mythvideo, and regardless of the > >> lirc version used. > >> > >> I have compiled mythtv with athlon optimizations, may this be a problem? > >> > >> > >>> LIRC is working the way it's supposed to. It isn't a focus problem > >>> (unless you've also got irxevent in the mix). > >> > >> > >> agree. i wish i had irxevent running so i could kill it ;) > >> > >> > >>> Since Myth isn't responding to the commands when the buttons are pressed, > >>> it doesn't seem to be a problem with Myth failing to set the lirc_lock. > >>> LIRC doesn't queue up events, so if there is a queue of events executing, > >>> it's probably coming from elsewhere. > >> > >> > >> how sure are you? i think mythfrontend is blocked while the player command > >> executes. it really looks like something cues up some events. > >> > >> the blocking (myth ignoring lirc) seems to work partially, because it's > >> definately not all buttons which come through. when i just start a player > >> through myth and exit it after some seconds (no other buttons pressed) > >> then it's a 70:30 chance, sometimes myth stays in the current menu (off > >> button not received), and sometimes it reacts leaving the current menu. > >> the more buttons i use during playback, the more actions follow later on > >> when player exits. but it's not all button-presses, just...some. sometimes > >> after watching a whole dvd with menu navigation and other key pressed, > >> myth goes completely mad afterwards and navigates through a couple of > >> menus, i even almost had deleted a tv show one time ("are you sure you wish > >> to delete?"). > >> > >> just annoying. > >> > >> so how does that locking/blocking work? maybe myth stops blocking lirc too > >> late (player already running) or too fast (player still running)? > >> > >> > >>> Good luck, > >> > >> > >> thanks, i need it ;) > >> > >> i hope someone can reproduce or explain this!?! > >> > >> > >> > >> _______________________________________________ > >> mythtv-users mailing list > >> mythtv-users@mythtv.org > >> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > > ---------------------------------------------- > "We Americans, we're a simple people... > but piss us off, and we'll bomb your cities." > --------------Robin Williams------------------ > _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users