On 9/7/05, Robin Gilks <[EMAIL PROTECTED]> wrote:
Off the top of my head, I'd say you want to set the backend up as a slave, set the IP for the current backend as master, mount your nfs properly and set up the proper directory structure, put the cards in the front end and configure them, and make sure the boxes are checked correct to not allow any transcoding or commercial cutting jobs to run on that slave.
My question is why you'd want to do that?
Ryan
Greetings all
I'd like to shift the capture card from my heavy/noisy server backend to
the frontend which is an EPIA running diskless with nfs mounts back to the
server (this avoids long cable runs).
This means I'll have to run the backend code on the EPIA for the capture
but I want to keep the mysql, commercial cutting and transcoding on the
server (its got 5 times the grunt after all!!).
Is this possible and if so, how do I set up please?
Off the top of my head, I'd say you want to set the backend up as a slave, set the IP for the current backend as master, mount your nfs properly and set up the proper directory structure, put the cards in the front end and configure them, and make sure the boxes are checked correct to not allow any transcoding or commercial cutting jobs to run on that slave.
My question is why you'd want to do that?
Ryan
_______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
