Check that the ivtv driver detects your PVR-500 as two PVR-150s. Check that you can get data from both tuners by doing a "cat /dev/videoX > test.mpg", where X is first 0, and then 1. If not, then it's an ivtv problem.
Also, check that in the MythTV setup that you used "Tuner 0" for both /dev/video0 and /dev/video1. Despite the fact there is a "Tuner 1" entry, it isn't used with a PVR-500 (because the PVR-500 is seen by the ivtv driver as two PVR-150s). Can't help you with the LiveTV issue. I rarely get pauses when using it, and when I do, they're once per half hour, or even once per hour. -- Joe --- Steve <[EMAIL PROTECTED]> wrote: > Hey guys, > I have the WinTV-PVR-500 from Hauppauge. It's > supposed to be a dual tuner > card, and AFAIK Myth is only seeing one tuner. I > press 'C' because that's > supposed to change inputs, and it does. But only > when I'm not recording > anything. If I am recording Myth complains that all > available inputs are in > use. > Another problem I have is my LiveTV playback > pauses for about a tenth of a > second, EVERY second. It's really quite annoying and > I've messed with quite > a few settings and still can't seem to fix it. Any > help is appreciated. > - Thanks in advance, > Steve > > _______________________________________________ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > ______________________________________________________ Click here to donate to the Hurricane Katrina relief effort. http://store.yahoo.com/redcross-donate3/ _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users