I am having a similar problem. One thing you can try is to run mode2 which will give you the raw output from the IR receiver. I believe it gets it before the lirc daemon gets a chance to look at it. This also gives me no output. Haupenauge is actually pretty good with replacement parts. I just sent an email to their tech support and they sent me a new IR receiver/cable free of charge. Though in the end this has not fixed anything.

So check out mode2 but if you really think it's hardware Haupenauge was good to me about that at least which was a nice surprise. If you find any solution post it up here because I would love to be able to get it working again. Wireless keyboard to run myth is just not the same.

Andrew

On Sep 27, 2005, at 1:55 AM, Dave wrote:

Hi,

After moving recently, I've just rebuilt my Mythbox using Fedora FC 4. I cannot seem to get LIRC working. I think it's the IR transceiver itself not the set up; but before I try tracking down a replacement, I was hoping someone here might be able to sanity check my setup and debugging thus far..

Downloaded /etc/lircd.conf from Jarod's site for my setup

/dev looks ok:

# ls -al /dev/li*
lrwxrwxrwx  1 root root     5 Sep 25 18:52 /dev/lirc -> lirc0
crw-rw----  1 root root 61, 0 Sep 25 18:52 /dev/lirc0
crw-rw----  1 root root 61, 1 Sep 25 18:52 /dev/lirc1
srw-rw-rw-  1 root root     0 Sep 26 01:53 /dev/lircd

Everything seems to connect fine:

# dmesg | grep lirc
lirc_dev: IR Remote Control driver registered, at major 61
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
lirc_dev: lirc_register_plugin: sample_rate: 10
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
lirc_dev: lirc_register_plugin: sample_rate: 10

irw does nothing & irrecord returns with:

irrecord: gap not found, can't continue

irrecord leaves this in the log:

Sep 26 22:30:42 localhost lircd-0.7.2[2704]: accepted new client on /dev/lircd
Sep 26 22:30:48 localhost lircd-0.7.2[2704]: removed client

...and the kicker:

cat /dev/lirc

shows nothing when I hit a remote button. This leads me to the conclusion that the IR transceiver has given up the ghost.

Anything I've forgotten or could try? Does Haupppauge sell replacements?. Any other places I might be able to find a replacement?

Thanks!

-Dave
_______________________________________________
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users


_______________________________________________
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Reply via email to