On Wed, 5 Oct 2005 16:34:21 -0400, Jeff Simpson wrote: You might check out: http://groundstate.ca/c3mythtv
Down a ways there is a discussion about compiling the Xv, and XVmc drivers for a VIA motherboard... But the process will be exactly the same for you to do in gentoo, subject only to a choice of the difference video driver you are applying it to. There is another gotcha if you are doing this from source and that is that if you are using an oddly named kernel, the modules will get built under /lib/modules in a folder called something like 2.6.12-12custom... You have to move the drivers to the correct place which is something like /lib/modules/2.6.12-12mdk-i686-4GB-up/kernel/drivers etc etc etc... The compiling itself is nothing... But note, you may have to re-compile X from scratch in order to make this work... Not difficult but time-consuming.. Takes about 1 and three quarter hours on my Via SP13000 box...Definitely a start and go to lunch project. Geoffrey PS... I noticed that you inadvertantly spelt your first name wrong! PPS... Unless you live in the Toronto or Ottawa area (in which case you might be one of the ones I already know) you are the 4th distinct Jeff Simpson I have run across... it's almost as bad as being a Colin Campbell! G. R. Geoffrey Newbury [EMAIL PROTECTED] Barrister and Solicitor Telephone: 905-271-9600 Mississauga,Ontario, Canada Facsimile: 905-271-1638 _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users