Hi Greg, Regretfully my experience with linux is very limited at this stage - i strayed on the dark side many years ago when CPM was the way to do things and moved onto dos then windows. I have finally had enough of all of the problems and have come across to Linux.
i have tried to folllow Chris's instructions - but have not been able to get far due to limited knowledge at this stage. I would be happy to follow his example if i knew how to. Any suggestions would be great. Regards Justin On Thu, 2005-10-06 at 23:52 +1000, Greg Boundy wrote: > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Matthew Carle > Sent: Thursday, 6 October 2005 8:59 PM > To: 'Discussion about mythtv' > Subject: RE: [mythtv-users] Fusion DVB-t lite card > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of > > [EMAIL PROTECTED] > > Sent: Wednesday, 5 October 2005 9:48 PM > > To: [EMAIL PROTECTED]; Discussion about mythtv; David Watkins > > Cc: Discussion about mythtv > > Subject: Re: [mythtv-users] Fusion DVB-t lite card > > > > Quoting David Watkins <[EMAIL PROTECTED]>: > > > > > On 05/10/05, Justin <[EMAIL PROTECTED]> wrote: > > > > Regretfully it is not running. Any other thoughts? > > > > > > > > > > > > > > Not really - the only problems I had with my nova-t card > > were that the > > > autodetect loaded the wrong module (dvb-blackbird instead > > of dvb-cx88 > > > IIRC) and when I edited udev rules, to give mythtv permissions on > > > /dev/adapter0, I spelled adapter as adaptor (or vice versa) I still > > > can't remember which is right. That took a ridiculous time > > for me to > > > spot. > > > > > > You have given permissions to the all the devices within adapter0 > > > haven't you? The frontend and such? > > > > > > What does the output of dmesg give? > > > > > > Good Luck. > > > _______________________________________________ > > > mythtv-users mailing list > > > mythtv-users@mythtv.org > > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > > > > > Is the Device Drivers->Multimedia Devices->Video for > > Linux->DVB Support for CX2388x Based TV Cards option enabled > > in your kernel? Did you build the kernel yourself? > > _______________________________________________ > > mythtv-users mailing list > > mythtv-users@mythtv.org > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > My Dvico Lite card uses the CX23878A chip. > My Dvico T1 or Plus cards use the CX23881 chip. > > So for me, the Lite card requires different kernel drivers than the > T1/Plus cards. > > Ie. Lite DVB Module is bt878-dvb, whereas T1/Plus DVB Module is > dvb-cx88. > > Have a look at http://www.itee.uq.edu.au/~chrisp/Linux-DVB/DVICO/ > > _______________________________________________ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users