All of the sudden my HD3000 which is fed by my cabe (comcast)'s QAM feed is not able to tune to channels in Myth (after several months of working flawlessly).
If I watch the backend log: 2005-10-22 13:04:52.187 mythbackend: MythBackend started as master server 2005-10-22 13:04:52.198 DVB#0 DVB SI Table Parser Started 2005-10-22 13:04:52.202 DVB#0 Using DVB card 0, with frontend pcHDTV HD3000 HDTV. QSettings::sync: filename is null/empty 2005-10-22 13:04:52.209 New DB connection, total: 3 2005-10-22 13:04:53.473 DVB#0 DVB signal 394 | snr fd71 | ber 0 | unc 0 2005-10-22 13:04:53.476 DVB#0 Status: LOCK. 2005-10-22 13:04:53.477 DVB#0 Multiplex Locked 2005-10-22 13:04:54.622 DVB#0 Successfully tuned to channel 10_1. 2005-10-22 13:04:54.624 DVB#0 ERROR - Channel #10_1 is off air. running azap on the same card and same channel (10_1 is on qam 119) $ azap 119 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' tuning to 759000000 Hz video pid 0x0000, audio pid 0x0000 status 1f | signal fdf2 | snr fd89 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal fdf2 | snr fdbf | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal fdf2 | snr fdad | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 0394 | snr fda3 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 0394 | snr fda5 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 0394 | snr fd81 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal fdf2 | snr fd97 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal 0394 | snr fd97 | ber 00000000 | unc 00000000 | FE_HAS_LOCK seems to get a lock. And running dvb traffic, and cat /dev/dvb/adaptor0/dvr0 > test.ts gets a ts stream with all 5 subchannels including the one refereneced as "10_1" in myth. Does anyone have any thoughts on this? Thanks. _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
