Steve Deal wrote:
HD-3000 card running on SuSE 10 both frontend and backend on the same box.
dmesg reports:
Linux video capture interface: v1.00
ivtv_tveeprom: module not supported by Novell, setting U taint flag.
cx2388x v4l2 driver version 0.0.5 loaded
intel8x0_measure_ac97_clock: measured 52870 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKB] -> GSI 5 (level, low)
-> IRQ 5
cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV
[card=22,autodetected]
TV tuner 52 at 0x1fe, Radio tuner -1 at 0x1fe
i2c-algo-bit.o: (0) scl=1, sda=1
i2c-algo-bit.o: (1) scl=1, sda=0
i2c-algo-bit.o : (2) scl=1, sda=1
i2c-algo-bit.o: (3) scl=0, sda=1
i2c-algo-bit.o: (4) scl=1, sda=1
i2c-algo-bit.o: cx88[0] passed test.
cx88[0]/0: found at 0000:00:0a.0, rev: 5, irq: 5, latency: 64, mmio:
0xdd000000
lgdt330x: module not supported by Novell, setting U taint flag.
or51132: module not supported by Novell, setting U taint flag.
cx2388x dvb driver version 0.0.5 loaded
: chip found @ 0xc2 (cx88[0])
tuner 1-0061: type set to 52 (Thomson DDT 7610 (ATSC/NTSC))
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0
ACPI: PCI Interrupt 0000:00:0a.2[A] -> Link [LNKB] -> GSI 5 (level, low)
-> IRQ 5
cx88[0]/2: found at 0000:00:0a.2, rev: 5, irq: 5, latency: 64, mmio:
0xde000000
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 0 (pcHDTV HD3000 HDTV)...
I can acquire ASTC channels using azap and display using mplayer so I
know I have a signal.
When it comes to MythTV I've been steadily working through several
issues (e.g. gcc3.4, joystick.h) and I have run mythtv-setup,
mythfilldatabase, started mythbackend and I get the following output
with error:
2005-12-17 00:16: 24.016 Using runtime prefix = /usr/local
2005-12-17 00:16:24.030 New DB connection, total: 1
2005-12-17 00:16:24.037 Enabling Settings Cache.
2005-12-17 00:16:24.037 Clearing Settings Cache.
2005-12-17 00:16:24.039 Current Schema Version: 1120
Starting up as the master server.
2005-12-17 00:16:24.047 New DB connection, total: 2
2005-12-17 00:16:24.051 DVB#0 Using DVB card 0, with frontend 'pcHDTV
HD3000 HDTV'.
2005-12-17 00:16: 24.053 New DB connection, total: 3
2005-12-17 00:16:24.054 DVB#0 ERROR - Could not find dvb tuning
parameters for transport 32767
2005-12-17 00:16:24.055 DVB#0 ERROR - Failed to get channel options for
channel 11.
2005-12-17 00:16:24.065 New DB scheduler connection
2005-12-17 00:16:24.075 mythbackend version: 0.19.20051208-1
www.mythtv.org <http://www.mythtv.org>
2005-12-17 00:16:24.075 Enabled verbose msgs: important general
2005-12-17 00:16:24.076 AutoExpire: Found 1 recorders w/max rate of 138
MiB/min
2005-12-17 00:16:24.077 AutoExpire: Required Free Space: 3.0 GB w/freq:
10 min
I have seen other postings for this error but nothing that leads me to a
solution.
I would appreciate any suggestions on what to try next.
I ran into that one last night. I *think* I know what the problem
may be. My message is a little different. I got a "File not found"
error when the backend was starting up.
By looking at the logs ans scanning the time that the entries were
logged, I figured out that the kernel modules were not loaded when the
backend was starting. I was loading the modules with modprobe in
rc.local, which is executed after the backend startup script is executed.
I put the modprobe command in the mythbackend startup script,
which is icky. I believe that has fixed the problem, though I need a
few more reboots to make sure.
There has got to be a better way to do this. Anybody have any
pointers?
Chris...
--
"Those who would give up essential liberty to purchase a little
temporary safety deserve neither liberty nor safety" -- Benjamin
Franklin
_______________________________________________
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
