On 12/30/05, mike choy <[EMAIL PROTECTED]> wrote: > Joacim J wrote: > > Hi, > > > > I hope you all had a very nice christmas. > > > > Have anybody a clue regarding my question below? > > > > Best Regards > > Joacim J > > > > > > On 12/27/05, Joacim J <[EMAIL PROTECTED]> wrote: > > > >> Hi again, > >> > >> I never get udev to set the permissions correctly. Now I have the > >> following in /etc/rc.d/rc.local > >> > >> # START DVB-T card > >> /sbin/modprobe --remove cx88_blackbird > >> /sbin/modprobe cx88_dvb > >> > >> sleep 5 > >> chmod o+rw /dev/dvb/adapter0/demux0 > >> chmod o+rw /dev/dvb/adapter0/dvr0 > >> chmod o+rw /dev/dvb/adapter0/net0 > >> chmod o+rw /dev/dvb/adapter0/frontend0 > >> ## END DVB-T > >> > >> It seems to work fine but I would have been more satisfied without that > >> "hack". > >> > >> To the following issue... I have managed to scan the channels and > >> created a channels.config and have inserted the data in 'dvb_channel' > >> and 'dvb_pids' which I think is correct. I had to made it the hard way > >> since the mythtv scanning finds the channels but doesn't insert them > >> in the tables. > >> > >> When starting mythbackend I get this in the console: > >> > >> [EMAIL PROTECTED] ~]# mythbackend > >> 2005-12-27 23:21:37.524 New DB connection, total: 1 > >> Starting up as the master server. > >> 2005-12-27 23:21:37.534 mythbackend: MythBackend started as master server > >> 2005-12-27 23:21:37.535 New DB connection, total: 2 > >> 2005-12-27 23:21:37.538 DVB#0 DVB SI Table Parser Started > >> 2005-12-27 23:21:37.567 DVB#0 Using DVB card 0, with frontend Zarlink > >> MT352 DVB-T. > >> 2005-12-27 23:21:37.569 New DB connection, total: 3 > >> 2005-12-27 23:21:37.570 DVB#0 ERROR - Could not find dvb tuning > >> parameters for transport 0 > >> 2005-12-27 23:21:37.570 DVB#0 ERROR - Failed to get channel options > >> for channel 19. > >> 2005-12-27 23:21:37.575 New DB scheduler connection > >> > >> and when start "Watch TV" I get: > >> > >> 2005-12-27 23:22:30.982 Changing from None to WatchingLiveTV > >> 2005-12-27 23:22:31.023 DVB#0 Recorder: Card opened successfully > >> (using PS mode). > >> 2005-12-27 23:22:31.024 DVB#0 ERROR - No PIDS set, please correct your > >> channel setup. > >> 2005-12-27 23:22:32.043 DVB#0 WARNING - No data from card in 1 second. > >> 2005-12-27 23:22:33.047 DVB#0 WARNING - No data from card in 1 second. > >> 2005-12-27 23:22:34.051 DVB#0 WARNING - No data from card in 1 second. > >> > >> I have inserted the information as: > >> # > >> SVT1:626000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1019:1018:1010 > >> INSERT INTO `dvb_channel` VALUES (19, 1010, NULL, NULL, NULL, > >> 626000000, 'a', NULL, '2/3', NULL, NULL, 'qam_64', '8', '1/2', '8', > >> '1/8', 'n', NULL); > >> INSERT INTO `dvb_pids` VALUES (19, 1019, 'v', ''); > >> INSERT INTO `dvb_pids` VALUES (19, 1018, 'a', ''); > >> > >> What can be wrong? > >> > >> PS. I can watch the channels using XINE and channel.conf. DS > >> -- > >> Regards > >> Joacim > >> > >> > > > > > > -- > > Regards > > Joacim > > _______________________________________________ > > mythtv-users mailing list > > mythtv-users@mythtv.org > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > Joacim > what distro and kernel are you using, latest 2.6.13 kernels should have > full support for this card > I am using this under suse 10.0 and the system just picks it up. > Mythtv (0.18) just finds it and I can do a scan, but you need to put a > starting frequency into the the frequency table > the first time you scan. > > Mike C
Hi, I am using Fedora Core 4 with kernel 2.6.14-1.1653_FC4 and MythTV 0.18.1.20050523-1. I have managed to get the card to work within Xine but not with MythTV as I said before. Maybe I have got the data in dvb_channels and dvb_pids wrong and would be greatful if somebody could take a quick look at the files below. Here is the output of scan: http://test.jarkeborn.se/channels.conf >From that file I created a SQL script that populates the tables 'dvb_channel' and 'dvb_pids' http://test.jarkeborn.se/populate_dvb_channel_and_dvb_pids.sql The export of the tables after population looks like: http://test.jarkeborn.se/dvb_channel.sql http://test.jarkeborn.se/dvb_pids.sql I would be very pleased if anyone could take a look at them. If I have made something strange I think it's quite easy for you experienced DVB people to see it. Have a Happy New Years Eve!! -- Regards Joacim _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users