On 1/13/06, Steve Adeff <[EMAIL PROTECTED]> wrote:
On Thursday 12 January 2006 14:35, Graeme Hilton wrote:
> All,
>
> This is more of a system configuration issue than a myth issue, but as
> we all use a variety of display hardware I thought I'd be able to tap a
> few brains.
>
> I have a video card with a TV-Out and a VGA (a Radeon 9600XT). It's
> connected to an 8" LCD panel via the VGA and to my home theatre system
> (Denon DHT500). This feeds a 28" widescreen CRT through a SCART socket.
>
> The 8" panel is 800x600 native resolution and that's what the system is
> set to run at. I ran the fglrxconfig from ATI to set up the TV-Out and
> attached you can see the resulting xorg.conf . X is cloning the output
> from the VGA to the TV-Out. I have tried the Dual Head configuration,
> but X refuses to start. (I can dig out some logs if anyone is interested.)
>
> My problem is that when I turn on the TV it is receiving a 4:3 format
> signal, with black bars down the sides. I think this is because the
> signal from the TV-Out is 4:3. How can I get that to become a 16:9 format?
>
> Ideally I'd like 4:3 on the VGA and 16:9 on the TV. Does anyone have a
> similar setup?
you would need to change the resolution for the feed to the TV to a 16:9 feed.
so 800:450 would work and be relatively close to what you have.
--
Steve
_______________________________________________
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users