I followed the instructions given in Jarod C. Wilson's guide.Therefore, my kernel version is 2.6.14-1_1656_FC4. The "0.8.0-CVS" lirc version are obtained from the ATrpms together with the kernel modules as directed in the guide.

As for the LIRC_OPTS variable, this is the first time I have heard of it. Where to I check that and how should I set it.  One more thing, I discovered that I do not have /dev/lirc rather I have /dev/lircd. Is this normal?

On 17/01/06, Brian Wood <[EMAIL PROTECTED]> wrote:

On Jan 16, 2006, at 12:55 PM, Luke wrote:

> I have finally installed lirc for my MythTV box. I can start the
> lircd daemon [OK]. If I check the status soon after, I see that the
> daemon is running. However, if I run /usr/bin/irw I get no output
> and the lircd daemon dies. My log files show the following entries:
>
> Jan 16 21:26:55 media lircd-0.8.0-CVS[3464]: lircd(userspace) ready
> Jan 16 21:27:10 media lircd-0.8.0-CVS[3464]: accepted new client
> on /dev/lircd
> Jan 16 21:27:10 media lircd-0.8.0-CVS[3464]: could not get file
> information for /dev/lirc
> Jan 16 21:27:10 media lircd-0.8.0-CVS[3464]: default_init(): No
> such file or directory
> Jan 16 21:27:10 media lircd-0.8.0-CVS[3464]: caught signal
>
> Jan 16 21:27:28 media lircd-0.8.0-CVS[3497]: lircd(userspace) ready
> Jan 16 21:27:47 media lircd-0.8.0-CVS[3497]: accepted new client
> on /dev/lircd
> Jan 16 21:27:47 media lircd-0.8.0-CVS[3497]: could not get file
> information for /dev/lirc
> Jan 16 21:27:47 media lircd-0.8.0-CVS[3497]: default_init(): No
> such file or directory
> Jan 16 21:27:47 media lircd-0.8.0-CVS[3497]: caught signal
>
> What could be the problem here? My remote input is onboard the
> Prolink PixelView PlayTV Pro card (a bttv bt878 card).

I'm not familiar with the " 0.8.0-CVS" lirc version, and you don't
mention what kernel version you are using, but I have noticed that
lirc seems to be very sensitive to kernel version, for example
0.8.0_pre1 works with my 2.6.14 kernel, while 0.8.0_pre3 does not,
although pre3 says that it has modifications for the 2.6.15 kernel.

I assume you have checked that LIRC_OPTS is pointing to the correct
character device for your setup.


_______________________________________________
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

_______________________________________________
mythtv-users mailing list
mythtv-users@mythtv.org
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Reply via email to