I just upgraded my kernel and a few modules. I can do a cat /dev/video0 and my system will capture, however mythtv is just showing a black screen on live TV. I cannot capture with scheduled recordings either. I updated ivtv and ran mythtv-setup, but it didn't seem to resolve the issue:
2006-01-23 17:39:38.330 RemoteFile::Read() failed in RingBuffer::safe_read(). 2006-01-23 17:39:38.539 RemoteFile::Read() failed in RingBuffer::safe_read(). 2006-01-23 17:39:38.748 RemoteFile::Read() failed in RingBuffer::safe_read(). 2006-01-23 17:39:38.957 RemoteFile::Read() failed in RingBuffer::safe_read(). 2006-01-23 17:39:39.166 RemoteFile::Read() failed in RingBuffer::safe_read(). 2006-01-23 17:39:39.375 RemoteFile::Read() failed in RingBuffer::safe_read(). Couldn't read file: rbuf://192.168.0.50:6543/myth/buffer//ringbuf2.nuv 2006-01-23 17:39:39.391 LiveTV not successfully started 2006-01-23 17:39:39.401 Changing from None to WatchingLiveTV 2006-01-23 17:39:39.404 Changing from None to None 2006-01-23 17:39:39.417 Enable DPMS 2006-01-23 17:39:39.426 Using protocol version 15 2006-01-23 17:39:39.563 Using protocol version 15 2006-01-23 17:39:39.697 Using protocol version 15 2006-01-23 17:39:39.834 Using protocol version 15 2006-01-23 17:39:39.971 Using protocol version 15 2006-01-23 17:39:40.105 Using protocol version 15 2006-01-23 17:39:40.242 Using protocol version 15 2006-01-23 17:39:40.379 Using protocol version 15 # uname -r Linux mythtv.workgroup 2.6.12-1.1381_FC3 #1 Fri Oct 21 03:46:55 EDT 2005 i686 athlon i386 GNU/Linux # rpm qa mythtv-backend ivtv mythtv-backend-0.18.1-117.rhfc3.at.i386 ivtv-firmware-enc.noarch ivtv-firmware-dec.noarch ivtv-kmdl-2.6.12-1.1381_FC3.i686 perl-Video-ivtv.i386 ivtv-firmware-audio.noarch ivtv-firmware.noarch ivtv.i386 ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.2 (tagged release) loading ivtv: Linux version: 2.6.12-1.1381_FC3 686 REGPARM 4KSTACKS gcc-3.4 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected WinTV PVR 250 card (cx23416 based) ivtv0: Unreasonably low latency timer, setting to 64 (was 32) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] : chip found @ 0xc2 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] saa7115 0-0021: ivtv driver saa7115 0-0021: saa7115 found @ 0x42 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=saa7115, addr=21] ivtv0: i2c attach to card #0 ok [client=MSP3445G-B8, addr=40] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02040024 ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011 or 0x02050032. ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Initialized WinTV PVR 250, card #0 ivtv: ==================== END INIT IVTV ==================== -Brian _______________________________________________ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users