Ed,

As I recall, the SD drivers are present in the source, but a lack of BIOS Data Area space stopped the integration of the driver into the BIOS.
The init and read/write calls are operational, but will have to specifically be loaded with any code at this time.

--John



On 07/12/2014 07:35 PM, Edward Snider wrote:
Hi everyone,

I have my SBC-188 up and running and I've noticed the Bios (043) appears to support
the Dual SD card board, which is great.  A couple of questions if anyone knows...

1) Does it use the same port addressing as the SBCV2 using RomWBW? (if not, what does it expect?)

2) Is it possible to boot into DOS using the SD card, assuming a properly prepared system on the card?

Also, the BIOS043.zip file up on the wiki appears to be corrupted, I can't unzip it (tried with 2 different operating systems).
If someone could re-upload it, that would be great.    BIOS042.zip decompresses just fine.

Thanks,

Ed
--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/n8vem.
For more options, visit https://groups.google.com/d/optout.

--
You received this message because you are subscribed to the Google Groups "N8VEM" group.
To unsubscribe from this group and stop receiving emails from it, send an email to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/n8vem.
For more options, visit https://groups.google.com/d/optout.

Reply via email to