Hi Ed! I have to congratulate you on an excellent build! I have a Z80 CP/M v2.2 fully functional myself in an FPGA. The reason I mention it is while I have been scouring the internet for CP/M software I have found some CP/M 68K files as well. Just put in CP/M 68K into bing.com and you should get some hits. I hope this helps. By the way, my entire Z80 microcomputer can sit in the palm of my hand excluding the VGA Monitor and the PS/2 Keyboard of course. Mine also has two RS-232 serial ports with hardware handshaking so if this Mini-M68K CP/M SBC you built has a serial port, you might want to check out Grant Searle’s Multicomp Z80 CP/M file transfer program He created. You can get source code for his download.com program. Maybe you can use it as a model for a 68K version. I hope this helps. Take care my friend.
Kip Koon [email protected] http://www.cocopedia.com/wiki/index.php/Kip_Koon http://computerpcdoc.com/ From: [email protected] [mailto:[email protected]] On Behalf Of Edward Snider Sent: Sunday, September 07, 2014 11:02 PM To: [email protected] Subject: [N8VEM: 18644] Another mini-M68k computer lives... Hi group, I just got my mini-M68k board up and running with the pre-built rom from the wiki that includes a basic CP/M 68k 1.2 system. Which unfortunately doesn't seem to have an xmodem transfer utility that I can see. I'm going to have to figure out how to exchange files with this little machine. After using a hex editor to change the mbr partition entries to type 52h, the cf card is working well with it on the MFP board. Init(ing), copying files, etc. This is BIOS version 0.9, is that the current one? Anyone know of a CP/M 68k software repository or the like? I'm starting to get the impression that not a lot was written for it. Ed <https://lh5.googleusercontent.com/-ZvmP0gs7pHs/VA0b3jjJJ1I/AAAAAAAAAHA/ww7-14l5DNE/s1600/20140907_215851.jpg> <https://lh6.googleusercontent.com/-6umArMXgcC4/VA0asp-qGWI/AAAAAAAAAG0/1cUJRWxX-Fo/s1600/Mini%2B68000.png> -- You received this message because you are subscribed to the Google Groups "N8VEM" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/n8vem. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "N8VEM" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/n8vem. For more options, visit https://groups.google.com/d/optout.
