Hi all,
i have installed nrpe service on remote host a win2003 server, the service just runs fine and i want to start monitorinfg free space on servers.
I have downloaded chec_disk on nagiosexchange and defined the services in
nrpe.cfg as follows:
command[check_disk_c]=cscript.exe //NoLogo //T:10 c:\nrpe\bin\check_disk.wsf /drive:"c:\" /w:300 /c:100
command[check_disk_d]=cscript.exe //NoLogo //T:10 c:\nrpe\bin\check_disk.wsf /drive:"d:\" /w:300 /c:100
when i run the check_nrpe on the nagios server from command line all is good :
../libexec/check_nrpe -H 10.8.1.3 -c check_disk_c
Drive C:\ - Total: 11.72 GB - Free: 3.94 GB (34%) - Used:
7.78 GB (66%)
../libexec/check_nrpe -H 10.8.1.3 -c check_disk_d
Drive D:\ Data - Total: 56.08 GB - Free: 25.25 GB (45%) - Used: 30.83 GB (55%)
I did define nrpe in checkcommands.cfg
as follows:
define command{
command_name check_nrpe
command_line $USER1$/check_nrpe -H $HOSTADDRESS$ -c $ARG1$
}
and run it this way in services.cfg
check_command check_nrpe!check_disk_c
but when i run it from Nagios, all i get is a CRITICAL state with ouput 'Connection refused by host'. Actually i started working with nrpe because i had the same problem with nsclient. Besides the log are empty concerning this critical state. All checks on disks are refused.
Any ideas.
Cheers
--
Le bon sens est la chose du monde la mieux partagée.
- [Nagios-users] nrpe issue Toto Capuccino
- Re: [Nagios-users] nrpe issue Kai Reese
- Re: [Nagios-users] nrpe issue Toto Capuccino
