Marc, I would agree regarding the firewall. I have debug tracing running now to see if it's something strange.
I was looking at the timeout and it was set to the default of 10 seconds. I went ahead and increased it to 15. It's been running for about 2 hours in debug mode without incident. We are rebooting a bunch of switches tomorrow morning at the same location so I want to see if I run into the same scenario. Thanks for your help. Time for another cup-o-coffee. Mike -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Marc Powell Sent: Wednesday, February 15, 2006 11:54 AM To: Nagios Users Subject: RE: [Nagios-users] Nagios Hang? > -----Original Message----- > From: Mike Koponick [mailto:[EMAIL PROTECTED] > Sent: Wednesday, February 15, 2006 11:53 AM > To: Marc Powell; Nagios Users > Subject: RE: [Nagios-users] Nagios Hang? > > Marc, > > Thanks for the "is_volatile" tip. > > As for the NSCA, I found further information: > > Feb 15 08:01:26 cmi-console nagios: Warning: OCSP command > '/usr/local/nagios/libexec/submit_check_result PHM.2950.110.5 > 'check_ping' 'OK' 'PING OK - Packet loss = 0%, RTA = 6.81 ms' ''' for > service 'check_ping' on host 'PHM.2950.110.5' timed out after 5 seconds > > Feb 15 08:10:09 cmi-console nagios: Warning: OCSP command > '/usr/local/nagios/libexec/submit_check_result 2950-135 'check_ping' > 'OK' 'PING OK - Packet loss = 0%, RTA = 3.43 ms' ''' for service > 'check_ping' on host '2950-135' timed out after 5 seconds > > Feb 15 08:12:36 cmi-console nagios: Warning: OCSP command > '/usr/local/nagios/libexec/submit_check_result 2950-34 'check_ping' 'OK' > 'PING OK - Packet loss = 0%, RTA = 1.50 ms' ''' for service 'check_ping' > on host '2950-34' timed out after 5 seconds > > > This has the appearance that send_nsca is getting timed out. I don't see > the connection ending up on the remote side. Try running them by hand. Maybe they're just taking longer than 5 seconds to complete for some reason. > > I wonder if this some type of weird NAT issue going on between the two > firewalls. Although, I do see other NSCA traffic working just fine from > the same server. Only you would know or be able to tell ;) I would assume that if some work then all should work though. -- Marc ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=k&kid3432&bid#0486&dat1642 _______________________________________________ Nagios-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid3432&bid#0486&dat1642 _______________________________________________ Nagios-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
