On the first hand i get errors related to ncsclient itself :
The error on the monitored host is :
Event Source: NRPE_NT
Description:
NRPE_NT: Error: Request contained illegal metachars!
The error on NSC.log is 2006-04-22 12:35:59: error:../../include\Socket.h:443: bind failed: 10048
When i look to netstat i get (i kept the most relevant lines):
TCP 0.0.0.0:5666 0.0.0.0:0 LISTENING 6896
[NRPE_NT.exe]
TCP 0.0.0.0:12489 0.0.0.0:0 LISTENING 14168
[NSClient++.exe]
TCP 0.0.0.0:1248 0.0.0.0:0 LISTENING 1052
[pNSClient.exe]
So i have NRPE_NT and nsclient (not ++) installed, is there's a conflict with nsclient++ ?
On the second hand i get errors related to the check_command:
The error on the monitored host is :
Event Source: NRPE_NT
Description:
NRPE_NT: Error: Request contained illegal metachars!
When i try nsclient++ /test, the first error i notice is that it doesnt handle the space in the path of the files ( Program Files) --> File=d:\Program
Files\Exchsrvr\MDBDATA\priv1
.stm File=d:\Program
Files\Exchsrvr\MDBDATA\priv1.edb
I tried both 'Program Files' and "Program Files" but it doesnt work.
From the command line on the nagios server i try like this :
../libexec/check_nrpe -H catorsv03 -c check_exchangeDB -a MaxWarn=15G MaxCrit=16G File=d:\'Program Files'\Exchsrvr\MDBDATA\priv1.stm File=d:\'Program Files'\Exchsrvr\MDBDATA\priv1.edb'
CHECK_NRPE: Received 0 bytes from daemon. Check the remote server logs for error messages.
Here is the NSC.ini file :
[modules]
;# NSCLIENT++ MODULES
;# A list with DLLs to load at startup.
; You will need to enable some of these for NSClient++ to work.
; ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !
; * *
; * N O T I C E ! ! ! - Y O U H A V E T O E D I T T H I S *
; * *
; ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !
FileLogger.dll
;CheckSystem.dll
CheckDisk.dll
NSClientListener.dll
NRPEListener.dll
;SysTray.dll
;CheckEventLog.dll
;CheckHelpers.dll
;
; CheckWMI IS AN EXTREM EARLY IDEA SO DONT USE FOR PRODUCTION ENVIROMNEMTS!
;CheckWMI.dll
;
; RemoteConfiguration IS AN EXTREM EARLY IDEA SO DONT USE FOR PRODUCTION ENVIROMNEMTS!
;RemoteConfiguration.dll
[Settings]
;# OBFUSCATED PASSWORD
; This is the same as the password option but here you can store the password in an obfuscated manner.
; *NOTICE* obfuscation is *NOT* the same as encryption, someone with access to this file can still figure out the
; password. Its just a bit harder to do it at first glance.
;obfuscated_password=Jw0KAUUdXlAAUwASDAAB
;
;# PASSWORD
; This is the password (-s) that is required to access NSClient remotely. If you leave this blank everyone will be able to access the daemon remotly.
;password=martin
;
;# ALLOWED HOST ADDRESSES
; This is a comma-delimited list of IP address of hosts that are allowed to talk to the all daemons.
; If leave this blank anyone can access the deamon remotly (NSClient still requires a valid password).
allowed_hosts=10.1.1.13
;
;# USE THIS FILE
; Use the INI file as opposed to the registry if this is 0 and the use_reg in the registry is set to 1
; the registry will be used instead.
use_file=1
[log]
;# LOG DEBUG
; Set to 1 if you want debug message printed in the log file (debug messages are always printed to stdout when run with -test)
debug=1
;
;# LOG FILE
; The file to print log statements to
file=c:\nsclient-plus-plus\NSC.log
;
;# LOG DATE MASK
; The format to for the date/time part of the log entry written to file.
;date_mask=%Y-%m-%d %H:%M:%S
[NSClient]
;# ALLOWED HOST ADDRESSES
; This is a comma-delimited list of IP address of hosts that are allowed to talk to NSClient deamon.
; If you leave this blank the global version will be used instead.
allowed_hosts= 10.1.1.13
;
;# NSCLIENT PORT NUMBER
; This is the port the NSClientListener.dll will listen to.
port=12489
;
;# BIND TO ADDRESS
; Allows you to bind server to a specific local address. This has to be a dotted ip adress not a hostname.
; Leaving this blank will bind to all avalible IP adresses.
;bind_to_address=
[Check System]
;# CPU BUFFER SIZE
; Can be anything ranging from 1s (for 1 second) to 10w for 10 weeks. Notice that a larger buffer will waste memory
; so don't use a larger buffer then you need (ie. the longest check you do +1).
;CPUBufferSize=1h
;
;# CHECK RESOLUTION
; The resolution to check values (currently only CPU).
; The value is entered in 1/10:th of a second and the default is 10 (which means ones every second)
;CheckResolution=10
[NRPE]
;# NRPE PORT NUMBER
; This is the port the NRPEListener.dll will listen to.
port=5666
;
;# COMMAND TIMEOUT
; This specifies the maximum number of seconds that the NRPE daemon will allow plug-ins to finish executing before killing them off.
;command_timeout=60
;
;# COMMAND ARGUMENT PROCESSING
; This option determines whether or not the NRPE daemon will allow clients to specify arguments to commands that are executed.
allow_arguments=1
;
;# COMMAND ALLOW NASTY META CHARS
; This option determines whether or not the NRPE daemon will allow clients to specify nasty (as in |`&><'"\[]{}) characters in arguments.
allow_nasty_meta_chars=1
;
;# USE SSL SOCKET
; This option controls if SSL should be used on the socket.
;use_ssl=1
;
;# BIND TO ADDRESS
; Allows you to bind server to a specific local address. This has to be a dotted ip adress not a hostname.
; Leaving this blank will bind to all avalible IP adresses.
; bind_to_address=
;
;# ALLOWED HOST ADDRESSES
; This is a comma-delimited list of IP address of hosts that are allowed to talk to NRPE deamon.
; If you leave this blank the global version will be used instead.
;allowed_hosts=
[NRPE Handlers]
check_exchangeDB=inject CheckFileSize MaxWarn=15G MaxCrit=16G File='d:\Program Files\Exchsrvr\MDBDATA\priv1.stm' File='d:\Program Files\Exchsrvr\MDBDATA\priv1.edb'
;# COMMAND DEFINITIONS
;# Command definitions that this daemon will run.
;# Can be either NRPE syntax:
;command[check_users]=/usr/local/nagios/libexec/check_users -w 5 -c 10
;# Or simplified syntax:
;test=c:\test.bat foo $ARG1$ bar
;check_disk1=/usr/local/nagios/libexec/check_disk -w 5 -c 10
;# Or even loopback (inject) syntax (to run internal commands)
;# This is a way to run "NSClient" commands and other internal module commands such as check eventlog etc.
;check_cpu=inject checkCPU warn=80 crit=90 5 10 15
;check_eventlog=inject CheckEventLog Application warn.require.eventType=error warn.require.eventType=warning critical.require.eventType=error critical.exclude.eventType=info truncate=1024 descriptions
;check_disk_c=inject CheckFileSize ShowAll MaxWarn=1024M MaxCrit=4096M File:WIN=c:\ATI\*.*
;# But be careful:
; dont_check=inject dont_check This will "loop forever" so be careful with the inject command...
;# Check some escapings...
; check_escape=inject CheckFileSize ShowAll MaxWarn=1024M MaxCrit=4096M "File: foo \" WIN=c:\\WINDOWS\\*.*"
