RE: [Nagios-users] Check_load

[Sandeep Narasimha Murthy]

Thanks Derek for your explanation.   I still have some doubts and appreciate some clarification:   1.The server in question has 2 CPUs. When Nagios invokes check_load, does it monitor both the CPUs and reports the combined load average ?   2. What are the CRITICAL, WARNING and OK thresholds for Load Average ? I mean when does it launch a Critical state ?   Thnx again,   Sg   From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Derek J. Balling Sent: quarta-feira, 10 de Maio de 2006 11:52 To: nagios-users@lists.sourceforge.net Subject: Re: [Nagios-users] Check_load       On May 10, 2006, at 6:42 AM, Sandeep Narasimha Murthy wrote:   Can anyone please provide a brief idea on how check_load works and on the data it provides. The data provided is in the format load average: 1.62, 1.67, 1.74, which doesn’t make a lot of sense. I googled on this and ended up getting even more confused.   "load average" is the number of processes (average) in the wait state over a given period of time. For most UNIX machines, the periods are usually 1, 5 and 15 minutes. (e.g., in your example, in the past minute an average of 1.62 machines were waiting for a CPU, in the past five minutes, 1.67, and in the past 15 minutes, 1.74).   In the example you give, it would appear your machine is catching up, as the short-term averages are lower than the long-term averages, but it all depends on your applications that are running, what cycles they demand CPU on, etc., etc. The reason behind my question is that we are also using CACTI for monitoring the systems and it shows a 100% CPU load since last night while Nagios didn’t raise any alarm at all. I have to find out whether it was a false alarm or there is a problem with my Nagios setup .. It's confusing to refer to "100% CPU load" since load isn't measured in percentage (at least not in this case, not usually). Referring to it as 100% CPU usage, or utilization, might be better.   For example, it's possible to have a CPU load of "0" and usage of 100%. How? If I've only got one process making use of CPU cycles, and it's getting 100% of the CPU. If there's nothing else waiting for CPU, the "load" will not be high, even though the usage (from the single running process) will be.   In other words, CPU usage isn't necessarily as important as load is, although it certainly can be a factor in determining the cause of Load (because processes which are waiting on Disk I/O, or swap, also contribute to load).   Hope this helps.   Cheers, D     --   Derek J. Balling Systems Administrator Vassar College 124 Raymond Ave Box 13 - Computer Center 217 Poughkeepsie, NY 12604 (845) 437-7231