Hi, On 1/16/2007 12:09 PM, Daniel wrote: > Hi there, > > i setup a host to check every 30secs btw every 60secs. > > The last check command was sheduled: > > Last Check Time: 01-16-2007 11:54:11 > > Now 10 minutes are over and nothink happends: > > Here my config for this host:
Your config shows an interval of 60. The normal interval length is 1 minute. You'll have to change your configuration accordingly. This is all in the Manual, by the way. Arno > define host{ > name ipv6 ; The name of this host > template - referenced in other host definitions, used for template recurs$ > notifications_enabled 1 ; Host notifications are > enabled > event_handler_enabled 1 ; Host event handler is > enabled > flap_detection_enabled 0 ; Flap detection is enabled > process_perf_data 1 ; Process performance data > retain_status_information 1 ; Retain status information > across program restarts > retain_nonstatus_information 1 ; Retain non-status > information across program restarts > parents ipv6 > register 0 ; DONT REGISTER THIS > DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE! > } > > define service{ > ; The 'name' of this service template, referenced in other service > definitions > name ipv6 > active_checks_enabled 1 ; Active service checks are > enabled > passive_checks_enabled 0 ; Passive service checks are > enabled/disabled > parallelize_check 1 ; Active service checks > should be parallelized > ; (disabling this can lead to > major performance problems) > obsess_over_service 1 ; We should obsess over this > service (if necessary) > check_freshness 0 ; Default is to NOT check > service 'freshness' > notifications_enabled 1 ; Service notifications are > disabled > event_handler_enabled 1 ; Service event handler is > disabled > flap_detection_enabled 0 ; Flap detection is disabled > process_perf_data 1 ; Process performance data > retain_status_information 1 ; Retain status information > across program restarts > retain_nonstatus_information 1 ; Retain non-status > information across program restarts > > register 0 ; DONT REGISTER THIS > DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE! > normal_check_interval 30 > retry_check_interval 30 > > } > > > > define host{ > use ipv6 > host_name vs-uptime > alias vs-uptime > address 89.106.71.100 > check_command check-host-alive > max_check_attempts 5 > process_perf_data 0 > retain_nonstatus_information 0 > contact_groups IPv6 > notification_interval 10 > notification_period 24x7 > notification_options d,u,r > } > > define service{ > use ipv6 > host_name vs-uptime > service_description PING > is_volatile 0 > check_period 24x7 > max_check_attempts 1 > normal_check_interval 1 > retry_check_interval 1 > contact_groups IPv6 > notification_options w,u,c,r > notification_interval 10 > notification_period 24x7 > check_command check_ping!100.0,40%!500.0,60% > } > > > In the nagios.cfg the normal check interval is set to 60secs. > > Nothink seems to be work... :( > > -- IT-Service Lehmann [EMAIL PROTECTED] Arno Lehmann http://www.its-lehmann.de ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null