On Fri, 2007-05-11 at 18:31 -0400, Andrew Tjang wrote: > Hello all, > > I have a problem where Nagios doesn't execute the active host checks at > all. My system is set up in the following way: > > I have about 1000 machines w/ their services set to disable active > check, and get all state info from an external command file (passive > checks). > > To this I added 2 hosts w/ services in which I've enabled active checks, > and provided a check command (config below). What happens is the > services get actively checked and updated, but Nagios assumes the host > is up (I guess because the services are returning values), and never > executes the host check. This is troubling because the host check > provides me with important data.
This is normal nagios behavior. If you want the data a host check would provide even when there are no service state changes (which is the only condition under which host checks will normally run), you should probably consider running it also as a service check. ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null