Dear list,
as I did not get any hints on my original questions, I try to formulate my
problem
a little bit in another way.
My problem is, that I get within my 200 watched services often CRITICALS
althought
there is just a simple network-problem and not a REAL problem. This
network-problem is
normally gone at the next query.
My first idea was to tell nagios via a config file, that it shall change it's
status from
OK to CRITICAL not before state SOFT 2.
But I think this is not the way ...?
Other ideas:
- Is it possible to "tell" nagios that network-problems are not CRITICALS ?
(Dangerous, because after a bunch of network problems you cannot tell if
the service is still alive)
- Or can you tell nagios always send two requests at nearly the same time.
Thanx,
Martin
------------------------------------------------------------------
Dipl.-Ing. Martin Schichl
SC&C Software, Communication & Consulting GmbH & Co KEG
EDV - Internet - PR - Events
Reininghausstr. 13, A-8020 Graz
Tel. +43/(0)316/90 85 00, Fax +43/(0)316/90 85 00 -90
Mobil: +43/676/840 439 100
[EMAIL PROTECTED], http://scc.co.at
PGP-Key:
https://keyserver2.pgp.com/vkd/DownloadKey.event?keyid=0xFDE06BE3FC7D0DBA
-----Ursprüngliche Nachricht-----
Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Im Auftrag von Martin Schichl
Gesendet: Donnerstag, 10. Mai 2007 13:21
An: nagios-users@lists.sourceforge.net
Betreff: [Nagios-users] Status Change at SOFT 2 ?
Dear list,
as I manage a number of servers, which are quite remotely placed, via
nrpe it
often happens that one or the other service(s) of the watched servers
will show
errors due to network insuffency.
Examples:
- "SSL Handshake not completed ..."
- "No response after ... seconds ..."
So this service will fall into the state SOFT 1 - But after the next
query the
service is OK again.
So I get many warnings/criticals which are not real problems of the
machines.
My question:
Is there a possibility to change the state of a service not at the first
fault (SOFT 1) but after the second fault (SOFT 2) - because then it
will
more likely be a real problem ...
Or is there a possibility that I can configure nagios in that way that
there
has to be a second fault query of the same service before the state fo
the
service will fall from OK into SOFT 1 - and the status will change?
Any hints?
ThanX,
Martin
-----------------------------------------------------------------
Dipl.-Ing. Martin Schichl
SC&C Software, Communication & Consulting GmbH & Co KEG
EDV - Internet - PR - Events
Reininghausstr. 13, A-8020 Graz
Tel. +43/(0)316/90 85 00, Fax +43/(0)316/90 85 00 -90
Mobil: +43/676/840 439 100
[EMAIL PROTECTED], http://scc.co.at
PGP-Key:
https://keyserver2.pgp.com/vkd/DownloadKey.event?keyid=0xFDE06BE3FC7D0DB
A
###########################################
This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange.
For more information, connect to http://www.f-secure.com/
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting
any issue.
::: Messages without supporting info will risk being sent to /dev/null
###########################################
This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange.
For more information, connect to http://www.f-secure.com/
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting
any issue.
::: Messages without supporting info will risk being sent to /dev/null
