On 29/07/07, Patel, H (Hiten) <[EMAIL PROTECTED]> wrote: > I need to implement monitoring for the set of temperature probes using snmp. > I've issued the following command: > /usr/local/nagios/libexec/check_snmp -H <IPADDRESS> -o > .<oid> -w 27 -c 28 -C public > > And got: > > SNMP OK - 22 | iso.3.6.1.4.1.17373.2.2.1.5.1=22 > > How can I implement this in Nagios?. I've only installed Nagios last week so > I'm not an expert yet.
The "SNMP OK - 22" is what will appear on-screen in Nagios (presumably that's 22 degrees C!); anything after the | pipe symbol is only used for collecting performance data - typically it is used if you have installed Nagiosgrapher, PNP or suchlike to graph the values you are getting from Nagios. So that command seems to be working fine. For Nagios, you need to set up a command definition, probably in /usr/local/etc/nagios/commands.cfg (depending on where you have your Nagios config files). Then you need to set up a service definition which uses the new command definition you've just set up. See. http://nagios.sourceforge.net/docs/2_0/xodtemplate.html I can heartily recommend Wolfgang Barth's book "Nagios" published by No Starch press if you want a head-start learning how to configure things in Nagios. hth, Jim ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Nagios-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
