Reformatted due to top posting.
> [EMAIL PROTECTED] wrote on 12/14/2007 01:15:33
PM:
>
> > >I am trying to view the status of port 1 on a Cisco 2970 switch.
> > >However, Nagios is giving me an UNKNOWN error. I tried running the
> > >following from a command prompt:
> > >./check_snmp -H <IP of the switch> -C <string> -o ifOperStatus.1 -r 1
> >
> > >I get the following response:
> > >SNMP OK - up(1) | RFC1213-MIB::ifOperStatus.1=up(1)
> > >
> > > If I am getting this response at the command prompt, why isn't the
> > > monitor coming up green in Nagios?
> > >
> > > Thanks,
> > > Mike
> > >
> >Are you running the command as the nagios user when you run it from
> >the command line?
> I am running it as root.
>
You will not be able to troubleshoot when running plugins as root. Root
has different permissions than the nagios user. Try running it as the
nagios user. Also, you will have to put the MIB somewhere nagios can use
it otherwise use the numeric for SNMP.
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
for just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Nagios-users mailing list
Nagios-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting
any issue.
::: Messages without supporting info will risk being sent to /dev/null
