Hmmmm... I re-compiled without the embedded-perl and perlcache, and the verification passed. So maybe there's an issue with one of these.
Anyways, if anyone has had a similar problem, I'd still be interested in hearing about it. ....k -=-=-=- > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf > Of Kevin Freels > Sent: Tuesday, April 01, 2008 12:22 PM > To: nagios-users@lists.sourceforge.net > Subject: [Nagios-users] Bus error on start and verification > > Greetings! > > To get the prelims out of the way: > > Nagios 3.0 > FreeBSD 4.10-STABLE > > Problem: I have built and installed 3.0 on this system, but > when I run the verification, I get a bus error. > > The output is: > > nagios# /usr/local/nagios3/bin/nagios -v > /usr/local/nagios3/etc/nagios.cfg > > Nagios 3.0 > Copyright (c) 1999-2008 Ethan Galstad (http://www.nagios.org) > Last Modified: 03-13-2008 > License: GPL > > Reading configuration data... > > LEN: 44, END: 42, BUF=log_file=/var/spool/nagios3/log/nagios3.log > BUFNOW: log_file=/var/spool/nagios3/log/nagios3.log > LEN: 1, END: -1, BUF= > . > . (more of the same) > . > LEN: 28, END: 26, BUF=max_debug_file_size=1000000 > BUFNOW: max_debug_file_size=1000000 > BUFNOW: (null)LEN: 44, END: 42, > BUF=log_file=/var/spool/nagios3/log/nagios3.log > BUFNOW: log_file=/var/spool/nagios3/log/nagios3.logrcmdsh: > unknown user: Äü$ûPjVè{ ûÿÄ F` Bus error > > > > > Not a lot to go on. :-( And, yes, the Klingon at the end > is as it is output. Funny, tho, the last line in the config > file is the "max_debug_file_size" config, but it looks like > it repeats back up to the top where the "log_file" is. Does > this have something to do with the caching? > > No core file produced, but if I try the init script, I get: > > Starting nagios:Bus error (core dumped) > CONFIG ERROR! Start aborted. Check your Nagios configuration. > > and a core file in the rc.d directory. > > I built this natively and saw no errors during the build or > the install(s). Here is the set of config options I used: > > ./configure --prefix=/usr/local/nagios3 \ > --with-nagios-user=nagios \ > --with-nagios-group=nagios \ > --with-lockfile=/var/run/nagios3.lock \ > --enable-embedded-perl \ > --with-perlcache \ > --with-checkresult-dir=/var/spool/nagios3/checkresults \ > --with-htmurl=/nagios3/ \ > --with-cgiurl=/nagios3/cgi-bin \ > --with-httpd-conf=/usr/local/etc/apache2/httpd.conf > > This is also the same system that we have Nagios 1.2 running on. > > Ideas? Bueller? > > Thanks, as always! > > > ....k > -=-=-=- > Kevin Freels > Director of Information Technology > Sendmail, Inc. > [EMAIL PROTECTED] 510/594.5572 > > -------------------------------------------------------------- > ----------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for just about > anything Open Source. > http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.n et/marketplace > _______________________________________________ > Nagios-users mailing list > Nagios-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/nagios-users > ::: Please include Nagios version, plugin version (-v) and OS > when reporting any issue. > ::: Messages without supporting info will risk being sent to /dev/null > ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace _______________________________________________ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null