Hello, Did you check your /etc/services for "nrpe 5666/tcp"? Regards,
Vincent Alloo TI France Design Systems Operations Manager Europe and Middle East IT Services Texas Instruments France E-Mail: [EMAIL PROTECTED] Phone: +33 4 93 22 26 97 Mobile: +33 6 82 13 00 80 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Izz Abdullah Sent: Friday, June 13, 2008 5:21 AM To: nagios Subject: Re: [Nagios-users] NRPE host on Solaris 10 (now can monitor from server, but local issue on remote host) This is interesting: although running the check_nrpe -H localhost on the remote host returns the error, I am able to monitor from the actual Nagios server. And yes, LOCAL, localhost, 127.0.0.1, etc. are in the hosts.allow file. I thought I would take the chance and see if I could monitor since I was receiving some data from the command line, just this one error. And sure enough, can. Now my question is WHY this is like this? Thanks again, Izz > -----Original Message----- > From: [EMAIL PROTECTED] > Sent: Thu, 12 Jun 2008 17:25:55 -0800 > To: nagios-users@lists.sourceforge.net > Subject: Re: [Nagios-users] NRPE host on Solaris 10 > > Also, I should mention this is the latest NRPE version, but more > importantly, we ran ./configure without SSL as I have had too many > problems with it. > > Thanks again, > Izz > >> -----Original Message----- >> From: [EMAIL PROTECTED] >> Sent: Wed, 11 Jun 2008 21:41:25 -0800 >> To: nagios-users@lists.sourceforge.net >> Subject: Re: [Nagios-users] NRPE host on Solaris 10 >> >> still the same error: Received 0 bytes from daemon... >> >> results from the two commands requested (everything looks ok to me): >> >> # svcs svc:/network/nrpe/tcp:default >> STATE STIME FMRI >> online Jun_10 svc:/network/nrpe/tcp:default >> >> # inetadm -l svc:/network/nrpe/tcp:default >> SCOPE NAME=VALUE >> name="nrpe" >> endpoint_type="stream" >> proto="tcp" >> isrpc=FALSE >> wait=FALSE >> exec="/usr/sfw/sbin/tcpd -c /usr/local/nagios/etc/nrpe.cfg >> -i" >> arg0="/usr/local/nagios/bin/nrpe" >> user="nagios" >> default bind_addr="" >> default bind_fail_max=-1 >> default bind_fail_interval=-1 >> default max_con_rate=-1 >> default max_copies=-1 >> default con_rate_offline=-1 >> default failrate_cnt=40 >> default failrate_interval=60 >> default inherit_env=TRUE >> default tcp_trace=FALSE >> tcp_wrappers=TRUE >> # >> >> The only thing I see different between this output and that on the site >> listed where I installed the remote host NRPE is there is no default for >> tcp_wrappers and no connection_backlog. But this shouldn't be the >> problem, right? >> >> Thanks again for your assistance, >> Izz >> >>> -----Original Message----- >>> From: [EMAIL PROTECTED] >>> Sent: Wed, 11 Jun 2008 10:21:58 +0100 >>> To: nagios-users@lists.sourceforge.net >>> Subject: Re: [Nagios-users] NRPE host on Solaris 10 >>> >>>> From: [EMAIL PROTECTED] [mailto:nagios-users- >>>> [EMAIL PROTECTED] On Behalf Of Izz Abdullah >>>> >>>> I have followed the instructions I found at >>>> http://www.utahsysadmin.com/2008/03/14/configuring-nagios-plugins-nrpe- >>>> on-solaris-10/ >>>> >>>> but to no avail. At the end of it all, when I try >>>> ./check_nrpe -H localhost >>>> >>>> it gives me a 0 bytes received from daemon. The first check in the >>>> list of >>>> /usr/local/nagios/libexec/check_disk -w 10 -c 5 -p / >>>> gives data...I don't know what's wrong here...I haven't configured a >>>> Solaris box to be monitored...any ideas / assistance? >>> >>> >From your description, it seems like the plugins are working OK but >>> the >>> problem is with the service itself. That's not surprising, SMF on >>> Solaris >>> 10 can be tricky to get right. I'd double check the entire section in >>> those instructions from "With Solaris 10, we don't use either inetd >>> ..." >>> to "Modify your hosts.allow ...". In particular make sure your >>> inetd.conf >>> entry is on one line (as the instructions say but then split over three >>> lines because of the narrow width of the page). If it's still not >>> working, post back with the relevant section of inetd.conf and the >>> output >>> of >>> >>> svcs svc:/network/nrpe/tcp:default >>> >>> and >>> >>> inetadm -l svc:/network/nrpe/tcp:default >>> >>> -- >>> Phil Costelloe >>> Foundation IT, Hermitage Berkshire RG18 9SE >>> >>> >>> >>> >>> ------------------------------------------------------------------------- >>> Check out the new SourceForge.net Marketplace. >>> It's the best place to buy or sell services for >>> just about anything Open Source. >>> http://sourceforge.net/services/buy/index.php >>> _______________________________________________ >>> Nagios-users mailing list >>> Nagios-users@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/nagios-users >>> ::: Please include Nagios version, plugin version (-v) and OS when >>> reporting any issue. >>> ::: Messages without supporting info will risk being sent to /dev/null >> >> ------------------------------------------------------------------------- >> Check out the new SourceForge.net Marketplace. >> It's the best place to buy or sell services for >> just about anything Open Source. >> http://sourceforge.net/services/buy/index.php >> _______________________________________________ >> Nagios-users mailing list >> Nagios-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/nagios-users >> ::: Please include Nagios version, plugin version (-v) and OS when >> reporting any issue. >> ::: Messages without supporting info will risk being sent to /dev/null > > ------------------------------------------------------------------------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Nagios-users mailing list > Nagios-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/nagios-users > ::: Please include Nagios version, plugin version (-v) and OS when > reporting any issue. > ::: Messages without supporting info will risk being sent to /dev/null ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null