I found this.. File: /etc/nagios-plugins/config/load.cfg
# 'check_load' command definition define command{ command_name check_load command_line /usr/lib/nagios/plugins/check_load --warning= $ARG1$,$ARG2$,$ARG3$ --critical=$ARG4$,$ARG5$,$ARG6$ } I've been using an older nagios book but just ordered up the apress nagios 2 version. Thanks, JJ On Thu, 2008-10-16 at 14:03 -0700, Aaron Segura wrote: > Please, always reply on-list. > > If the check is running via nagios, the command is defined somewhere. > Find it and send it. We can't help without that information. > > Also, you would benefit from reading the documentation pertaining to > service/command definitions. > > -----Original Message----- > From: jeremiah [mailto:[EMAIL PROTECTED] > Sent: Thursday, October 16, 2008 2:57 PM > To: Aaron Segura > Subject: RE: [Nagios-users] check_load issue > > Aaron, > > Thanks for your response. Here's the message I sent to the list. > > > Date: > Thu, 16 Oct 2008 13:49:17 -0700 > > > I checked my commands.cfg file and noticed the command wasn't defined > so > I went and put this in there... > > define command { > command_name check_load > command_line libexec/check_load -w $ARG1$ $ARG2$ $ARG3 -c > $ARG4$ $ARG5$ $ARG6$ > } > > However, when i restarted nagios it told me the command was already > defined. So, i then commented it out and restarted..it started but > still > the same error/problem: ""Warning threshold must be float or float > triplet! " > > Thoughts? > > JJ > > > > On Thu, 2008-10-16 at 13:40 -0700, Aaron Segura wrote: > > Going to at least need to see the command definition. > > > > -----Original Message----- > > From: jeremiah [mailto:[EMAIL PROTECTED] > > Sent: Thursday, October 16, 2008 2:33 PM > > To: Nagios > > Subject: [Nagios-users] check_load issue > > > > My check_load service keeps on giving me the following error. > > > > "Warning threshold must be float or float triplet! " > > > > However, when i run the command from the system it works just fine. > > > > ./check_load -w 10.0,8.0,5.0 -c 15.0,10.0,8.0 > > OK - load average: 0.01, 0.02, 0.00|load1=0.010;10.000;15.000;0; > > load5=0.020;8.000;10.000;0; load15=0.000;5.000;8.000;0; > > > > My services.cfg file looks as such..same values. > > > > check_command check_load!10.0,8.0,5.0!15.0,10.0,8.0 > > > > Any thoughts? > > > > Thanks, > > JJ > > > > > > > > > > Disclaimer: The information contained in this transmission, > including > > any > > attachments, may contain confidential information of Panasonic > > Avionics > > Corporation. This transmission is intended only for the use of the > > addressee(s) listed above. Unauthorized review, dissemination or > > other > > use > > of the information contained in this transmission is strictly > > prohibited. > > If you have received this transmission in error or have reason to > > believe > > you are not authorized to receive it, please notify the sender by > > return > > > > email and promptly delete the transmission. > > > > > > > > > ------------------------------------------------------------------------ > > - > > This SF.Net email is sponsored by the Moblin Your Move Developer's > > challenge > > Build the coolest Linux based applications with Moblin SDK & win > great > > prizes > > Grand prize is a trip for two to an Open Source event anywhere in > the > > world > > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > > _______________________________________________ > > Nagios-users mailing list > > Nagios-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/nagios-users > > ::: Please include Nagios version, plugin version (-v) and OS when > > reporting any issue. > > ::: Messages without supporting info will risk being sent > to /dev/null > > > > > > > > > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null