Hey Jason, I have been trying to get hpasm on FC8. However I could not get it working at all. I just wanted to if you have done any FC8 HP proliant GL 360 monitoring using check_hpasm.
I can share detail info, if you have any idea. Thanks for any hints. Regards, Manish Jayson Broughton wrote: > Hey Curtis, > > > > I can vouch for the check-hpasm utility that Gerhard recommends. We run a > shop of 20+ HP servers (all sorts of HP servers) and I use the check-hpasm > utility for our redhat servers. This utility has saved my neck a few times > when hardware has failed in remote sites. What I have done was install the > plugin under /usr/nagios/libexec/ and called it from the nagios server via > nrpe. Although the only problem I do have with the plugin is that at times > it will give false readings on the first check, but cleared on the 2nd > check. Logs from hpasmcli show nothing, so I would assume it has something > to do with the plugin being called by nrpe and just hiccupping. I solved > this by setting my notification thresholds for the service to notify via > email after the 3rd check. > > > > Here's what a memory module error looks like: > > CRITICAL - dimm module 5 @ cartridge 2 needs attention (dimm is degraded) > > > > And in a perfect world: > > OK - System: `proliant dl585 g1', S/N: 'xxxxxxxxx',ROM:A01 02/14/2007', > hardware working fine > > > > Jayson > > > > From: Gerhard Lausser [mailto:[EMAIL PROTECTED] > Sent: Wednesday, December 03, 2008 5:57 AM > To: 'Curtis LaMasters'; nagios-users@lists.sourceforge.net > Subject: Re: [Nagios-users] Monitoring HP Hardware - NRPE/NSCA on Windows > > > > Hi Curtis, > > > > with http://www.consol.com/opensource/nagios/check-hpasm you have two > possibilities > > local (linux): the plugin runs on the HP and parses the output of the > hpasmcli command > > remote (linux,windows): the plugin runs on the Nagios server and uses SNMP > > > > In both cases you need to install the hpasm RPM or the Windows Insight > Management Agents. > > > > Gerhard > > > > > _____ > > > Von: Curtis LaMasters [mailto:[EMAIL PROTECTED] > Gesendet: Dienstag, 2. Dezember 2008 23:17 > An: nagios-users@lists.sourceforge.net > Betreff: [Nagios-users] Monitoring HP Hardware - NRPE/NSCA on Windows > > What is the best method for doing this. I would prefer to have some sort of > script that parses information on the remote host on HP hardware. I have > found a few that use SNMP but I'm not sure how that works with NRPE/NSCA. > For Dell hardware I use check_dell.exe from http://www.itefix.no > <http://www.itefix.no/> . Anything similar would be great. > > Curtis LaMasters > http://www.curtis-lamasters.com > http://www.builtnetworks.com > > > The information in this electronic mail message and any attached files is > confidential and may be legally privileged. If you are not the intended > recipient, delete this message and contact the sender immediately. Access to > this message by anyone other than its intended recipient is unauthorized. > You must not use or disseminate this information as it is proprietary > property of the True companies. Communications on or through the True > companies' computer systems may be monitored or recorded to secure effective > system operation and for other lawful purposes. Thank you. > > > ------------------------------------------------------------------------ > > ------------------------------------------------------------------------- > This SF.Net email is sponsored by the Moblin Your Move Developer's challenge > Build the coolest Linux based applications with Moblin SDK & win great prizes > Grand prize is a trip for two to an Open Source event anywhere in the world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > > > ------------------------------------------------------------------------ > > _______________________________________________ > Nagios-users mailing list > Nagios-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/nagios-users > ::: Please include Nagios version, plugin version (-v) and OS when reporting > any issue. > ::: Messages without supporting info will risk being sent to /dev/null ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Nagios-users mailing list Nagios-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
