Good morning Nagios users list. I am hoping that someone here would be kind enough to take a look at this problem I'm having. I'm stumped so any troubleshooting steps would be greatly appreciated!
A short summary of the problem is this: a script called by the nagios user on
the target machine runs without error. However, when the script is called by
the remote check_nrpe script it fails, with apparently no output.
The check_nrpe script is configured to call a command that calls an HP script,
which then parses the output. Here is the command directive:
command[hplog_fan.pl]=/usr/local/nagios/libexec/videoegg/hplog_fan.pl
Here is the contents of the script:
#!/usr/bin/perl
@output = `sudo /sbin/hplog -f`;
unless (scalar @output > 1){
print "hplog isnt outputting";
exit(3);
}
foreach(@output){
if (/^ \d/){
unless (/Normal/){
print;
exit(2);
}
}
}
print "Ok HP Proliant fans";
exit(0);
__END__
t...@db032 ~]# hplog -f
ID TYPE LOCATION STATUS REDUNDANT FAN SPEED
1 Basic Fan System Board Normal Yes -------
2 Basic Fan System Board Normal Yes -------
3 Basic Fan System Board Normal Yes -------
4 Basic Fan System Board Normal Yes -------
5 Basic Fan I/O Zone Normal Yes -------
6 Basic Fan I/O Zone Normal Yes -------
Here is the script running without error when called by the local Nagios user:
[[email protected] ~]$ /usr/local/nagios/libexec/videoegg/hplog_fan.pl
Ok HP Proliant fans
[[email protected] ~]$ echo $?
0
Here is the script failing when being called remotely:
[[email protected] libexec]$ ./check_nrpe -H inf001.sfota.videoegg.com -c
hplog_power.pl
hplog isn't outputting
The variable @output is empty.
Check_nrpe is configured to run as Nagios (Xinetd definition):
service nrpe
{
flags = REUSE
socket_type = stream
port = 5666
wait = no
user = nagios
group = nagios
server = /usr/local/nagios/bin/nrpe
server_args = -c /usr/local/nagios/etc/nrpe.cfg --inetd
log_on_failure += USERID
disable = no
only_from = 127.0.0.1 10.11.1.10 10.11.1.11 192.168.101.10
192.168.101.11
}
The source machine is in the allowed list above - the command also fails if run
against localhost on the target machine, using it's own check_nrpe binary.
Here is the log output if debug is set to 1:
Jun 10 10:49:38 inf001 xinetd[20658]: START: nrpe pid=20991 from=192.168.101.11
Jun 10 10:49:38 inf001 nrpe[20991]: INFO: SSL/TLS initialized. All network
traffic will be encrypted.
Jun 10 10:49:38 inf001 xinetd[20658]: EXIT: nrpe status=0 pid=20991
duration=0(sec)
In the interest of completeness, the nrpe.cfg is attached to this email.
Regards,
Joseph Hammerman
nrpe.cfg
Description: nrpe.cfg
------------------------------------------------------------------------------ Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects
_______________________________________________ Nagios-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
