Dear Trond, The command gives the following output: Power Consumption Information
Power Consumption Index : 2 Status : Ok Probe Name : System Board System Level Reading : 0 W Warning Threshold : 916 W Failure Threshold : 964 W Amperage Location : PS 1 Current 1 Reading : [N/A] Location : PS 2 Current 2 Reading : [N/A] Power Tracking Statistics Statistic : Energy Consumption Measurement Start Time : Mon Apr 12 07:39:57 2010 Measurement Finish Time : Tue Apr 13 13:45:11 2010 Reading : 0.2 KWh Statistic : System Peak Power Measurement Start Time : Mon Apr 12 07:39:57 2010 Peak Time : Peak Reading : 0 W Statistic : System Peak Amperage Measurement Start Time : Mon Apr 12 07:39:57 2010 Peak Time : Peak Reading : 0.0 A It looks like OMSA can't read the powet usage from the server. I will look into this. The Beta doesn't display the internal error anymore. Thanks for your support Met vriendelijke groet, Richard Hagen QLiCT, Teamleider Techniek en Projecten Telefoon 053 4750633 Internet http://www.qlict.nl QliCT webshop vanaf 1 november geheel vernieuwd! AANTREKKELIJKE AANBIEDINGEN http://www.qlictshop.nl/ -----Oorspronkelijk bericht----- Van: Trond Hasle Amundsen [mailto:[email protected]] Verzonden: dinsdag 13 april 2010 13:39 Aan: Nagios Users List Onderwerp: Re: [Nagios-users] Internal error Richard Hagen <[email protected]> writes: > I recently installed a new DELL Poweredge 2970 with W2k8 and installed also > DELL OMSA. > > When i read the status from nagios i get the following error: > > Amperage probe 0 [PS 1 Current 1] reads 0 A > Amperage probe 1 [PS 2 Current 2] reads 0 A > INTERNAL ERROR: Use of uninitialized value in division (/) at /usr/lib/nagios/ > plugins/check_openmanage line 3536. > INTERNAL ERROR: Use of uninitialized value in division (/) at /usr/lib/nagios/ > plugins/check_openmanage line 3536. > INTERNAL ERROR: Use of uninitialized value in sprintf at /usr/lib/nagios/ > plugins/check_openmanage line 3562. Hi Richard, This happens because the value (i.e. reading from the amperage probes) are not reported by SNMP, while the rest of the data about the probes are reported (status, type, name etc.). There is something wrong with Openmanage on this server. What is the output from this command: omreport chassis pwrmonitoring That being said, the plugin could handle this better. Please try the beta version available here: http://folk.uio.no/trondham/tmp/ Cheers, -- Trond H. Amundsen <[email protected]> Center for Information Technology Services, University of Oslo ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Nagios-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Nagios-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
