C:\net-snmp\etc\snmp\snmpd.conf has to contain something like this : *Code:*rocommunity public Here is an example of ours:
*syslocation LAX* > > >> disk /var 5% > > disk /usr 5% > > disk /tmp 5% > > >> load 30 30 30 > > >> *syscontact [email protected]* > > *rwcommunity sdjslf8sdf8 192.168.0.0/24* > > *rocommunity public * > > > *You then need to restart NET-SNMP *for the changes to apply. Good little tutorial: http://forums.cacti.net/about26151.html Regards, Justin Dorfman Mahalo.com Inc. > Jr. Systems Engineer 818.485.1458 @jdorfman <http://www.twitter.com/jdorfman> | @MahaloSysops<http://twitter.com/MahaloSysops>| Blog: http://bit.ly/aNiWSk On Mon, Sep 13, 2010 at 2:54 AM, IT Toonz <[email protected]> wrote: > Hi Justin, > > > > Thanks for the reply. > > > > We downloaded net-snmp.exe and installed in a monitored window server. > > > > Didn’t modify anything, tried to start net-snmp service from the windows > system, stopped at event id 7031! Checking again > > > > Downloaded and installed the perl scripts... is there anything to modify... > > > > Please advice. > > > > Regards > > Ananth. > > > > > > > > > > *From:* Dorfman, Justin [mailto:[email protected]] > *Sent:* 10 September 2010 20:06 > > *To:* Nagios Users List > *Subject:* Re: [Nagios-users] SNMP showing Unknown > > > > Ananth, > > > > This is how we check an SNMP process (in commands.cfg): > > > > # 'check_snmp' command definition > > define command{ > > command_name check_snmp_process > > command_line $USER1$/check_snmp_process.pl -H $HOSTADDRESS$ -C > $USER3$ > > } > > > > I would recommend you downloading these perl scripts: > http://nagios.manubulon.com/index_snmp.html and putting them into your * > /usr/local/nagios/libexec* folder. > > > > Let me know how it goes. > > > > Regards, > > Justin Dorfman > Mahalo.com Inc. > Jr. Systems Engineer > 818.485.1458 > @jdorfman <http://www.twitter.com/jdorfman> | > @MahaloSysops<http://twitter.com/MahaloSysops>| Blog: > http://bit.ly/aNiWSk > > On Thu, Sep 9, 2010 at 2:36 AM, IT Toonz <[email protected]> wrote: > > Hi Justin, > > > > We have the native SNMP in Windows installed and we wanted to monitor those > readings. We downloaded and installed Net-SNMP, but seems there a bit of > configuring to do, we are fiddling with Nagios settings, so not sure whether > we want to spend time learning Net-SNMP at present. > > > > But its definitely something which we want to look at in the future. Thanks > for sharing the info. > > > > Meanwhile we are still stuck in SNMP!! > > > > This is what we get when we run > > [r...@nagios nagios]# snmpwalk -v1 -c taipl 192.168.3.100 snmp > > SNMPv2-MIB::snmpInPkts.0 = Counter32: 1 > > SNMPv2-MIB::snmpOutPkts.0 = Counter32: 11 > > SNMPv2-MIB::snmpInBadVersions.0 = Counter32: 0 > > SNMPv2-MIB::snmpInBadCommunityNames.0 = Counter32: 0 > > SNMPv2-MIB::snmpInBadCommunityUses.0 = Counter32: 0 > > SNMPv2-MIB::snmpInASNParseErrs.0 = Counter32: 0 > > SNMPv2-MIB::snmpInTooBigs.0 = Counter32: 0 > > SNMPv2-MIB::snmpInNoSuchNames.0 = Counter32: 0 > > SNMPv2-MIB::snmpInBadValues.0 = Counter32: 0 > > SNMPv2-MIB::snmpInReadOnlys.0 = Counter32: 0 > > SNMPv2-MIB::snmpInGenErrs.0 = Counter32: 0 > > SNMPv2-MIB::snmpInTotalReqVars.0 = Counter32: 11 > > SNMPv2-MIB::snmpInTotalSetVars.0 = Counter32: 0 > > SNMPv2-MIB::snmpInGetRequests.0 = Counter32: 0 > > SNMPv2-MIB::snmpInGetNexts.0 = Counter32: 14 > > SNMPv2-MIB::snmpInSetRequests.0 = Counter32: 0 > > SNMPv2-MIB::snmpInGetResponses.0 = Counter32: 0 > > SNMPv2-MIB::snmpInTraps.0 = Counter32: 0 > > SNMPv2-MIB::snmpOutTooBigs.0 = Counter32: 0 > > SNMPv2-MIB::snmpOutNoSuchNames.0 = Counter32: 0 > > SNMPv2-MIB::snmpOutBadValues.0 = Counter32: 0 > > SNMPv2-MIB::snmpOutGenErrs.0 = Counter32: 0 > > SNMPv2-MIB::snmpOutGetRequests.0 = Counter32: 0 > > SNMPv2-MIB::snmpOutGetNexts.0 = Counter32: 0 > > SNMPv2-MIB::snmpOutSetRequests.0 = Counter32: 0 > > SNMPv2-MIB::snmpOutGetResponses.0 = Counter32: 25 > > SNMPv2-MIB::snmpOutTraps.0 = Counter32: 10 > > SNMPv2-MIB::snmpEnableAuthenTraps.0 = INTEGER: enabled(1) > > > > > > So seems client side is fine. Please advice... below is the error we get by > mail > > > > ***** Nagios ***** > > > > Notification Type: PROBLEM > > > > Service: SNMP > > Host: antivirsrv > > Address: 192.168.3.100 > > State: UNKNOWN > > > > Date/Time: Thu Sept 9 14:42:56 IST 2010 > > > > Additional Info: > > > > No OIDs specified > > > > below is the config settings for windows servers > > > > # Create a service for monitoring SNMP > > > > define service{ > > use generic-service > > host_name taipl-domsrv > > host_name tai3dserver > > host_name tai3dstorage-02 > > host_name tai3d-avsrv > > service_description SNMP > > check_command > check_snmp!.1.3.6.1.2.1.25.2.3.1.6.2!1!Cachebuffers!50000!2000 > > } > > > > Please advice....what else is there to configure, please be specific, we > just started in Fully Automated Nagios, with a lot of help we have reached > this far.... J > > > > Regards > > Ananth. > > > > *From:* Dorfman, Justin [mailto:[email protected]] > *Sent:* 08 September 2010 22:59 > > > *To:* Nagios Users List > *Subject:* Re: [Nagios-users] SNMP showing Unknown > > > > First off do you have NET-SNMP ( > http://sourceforge.net/projects/net-snmp/files/net-snmp%20binaries/5.5-binaries/) > installed on the server you are trying to fetch info from? > > > > > Regards, > > Justin Dorfman > Mahalo.com Inc. > Jr. Systems Engineer > 818.485.1458 > @jdorfman <http://www.twitter.com/jdorfman> | > @MahaloSysops<http://twitter.com/MahaloSysops>| Blog: > http://bit.ly/aNiWSk > > On Wed, Sep 8, 2010 at 4:54 AM, IT Toonz <[email protected]> wrote: > > *You need to look at the service definition as well as the command* > > *definition to find out how the command is configured to run for this* > > *particular service check.* > > > > Which file that will be? The command.cfg file entry was the one we had put > in the earlier mail. > > > > We are newbies's so if possible kindly explain in detail. > > > > Regards > > Ananth. > > > > > > > > -----Original Message----- > From: Jim Avery [mailto:[email protected]] > Sent: 08 September 2010 16:13 > To: Nagios Users List > Subject: Re: [Nagios-users] SNMP showing Unknown > > > > On 8 September 2010 10:19, IT Toonz <[email protected]> wrote: > > > We are using FAN 2.0 > > > > > > > > > > > > One of our Windows Servers shows in Nagios. > > > > > > > > > > > > tai3dstorage-02 SNMP UNKNOWN 09-08-2010 15:09:50 1d 21h 46m 25s 3/3 No > OIDs > > > specified > > > > > > > > > > > > How can we troubleshoot it. This is the snmp entry in commands.cfg file. > > > > > > > > > > > > # 'check_snmp' command definition > > > > > > define command{ > > > > > > command_name check_snmp > > > > > > command_line $USER1$/check_snmp -H $HOSTADDRESS$ $ARG1$ > > > > > > } > > > > > > > > > > > > We entered the snmp community name give the switch –C after check_snmp, > but > > > still no effect. > > > > You need to look at the service definition as well as the command > > definition to find out how the command is configured to run for this > > particular service check. > > > > hth, > > > > Jim > > > > > ------------------------------------------------------------------------------ > > This SF.net Dev2Dev email is sponsored by: > > > > Show off your parallel programming skills. > > Enter the Intel(R) Threading Challenge 2010. > > http://p.sf.net/sfu/intel-thread-sfd > > _______________________________________________ > > Nagios-users mailing list > > [email protected] > > https://lists.sourceforge.net/lists/listinfo/nagios-users > > ::: Please include Nagios version, plugin version (-v) and OS when > reporting any issue. > > ::: Messages without supporting info will risk being sent to /dev/null > > > > ------------------------------------------------------------------------------ > This SF.net Dev2Dev email is sponsored by: > > Show off your parallel programming skills. > Enter the Intel(R) Threading Challenge 2010. > http://p.sf.net/sfu/intel-thread-sfd > _______________________________________________ > Nagios-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/nagios-users > ::: Please include Nagios version, plugin version (-v) and OS when > reporting any issue. > ::: Messages without supporting info will risk being sent to /dev/null > > > > > > ------------------------------------------------------------------------------ > This SF.net Dev2Dev email is sponsored by: > > Show off your parallel programming skills. > Enter the Intel(R) Threading Challenge 2010. > http://p.sf.net/sfu/intel-thread-sfd > _______________________________________________ > Nagios-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/nagios-users > ::: Please include Nagios version, plugin version (-v) and OS when > reporting any issue. > ::: Messages without supporting info will risk being sent to /dev/null > > > > > ------------------------------------------------------------------------------ > Start uncovering the many advantages of virtual appliances > and start using them to simplify application deployment and > accelerate your shift to cloud computing > http://p.sf.net/sfu/novell-sfdev2dev > > _______________________________________________ > Nagios-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/nagios-users > ::: Please include Nagios version, plugin version (-v) and OS when > reporting any issue. > ::: Messages without supporting info will risk being sent to /dev/null >
------------------------------------------------------------------------------ Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing http://p.sf.net/sfu/novell-sfdev2dev
_______________________________________________ Nagios-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/nagios-users ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. ::: Messages without supporting info will risk being sent to /dev/null
