ha ha.... I've also described it as possessed!   I'm sure you understand 
that term too!   But until it did that, what a great file!

Marsha Rubino wrote:
> I'm wondering if it can be repaired. They didn't take my complaint 
> seriously and blamed it on handpiece maintenance! I don't know how the 
> handpiece could affect the control box. (Warp speed-----great 
> description!)
>  
> Marsha McDonald Rubino
> GIMME NAILS @ the Devonshire
> 37 Fifth St. E. Suite 102
> Kalispell, Montana 59901
> [email protected]
>
>
> ------------------------------------------------------------------------
> *From:* Diane MacQuoid <[email protected]>
> *To:* [email protected]
> *Sent:* Wednesday, June 17, 2009 9:32:15 AM
> *Subject:* NailTech:: Re: has any tried foredom tools for filing
>
> Mine did that too!   Went into warp speed all on it's own!    Thank 
> goodness I had a backup.     I was wondering what it would cost for 
> repair as I really liked how it worked.
>
> Diane MacQuoid
> Tuff Enuff Nails
> www.tuffenuffnails.com
>
>
>
> Marsha Rubino wrote:
>> I have had my Kupa efile for about 8 years....love it. I've had my 
>> Vicki Peters efile for about 2 years....I like it, it handles 
>> similarly to my Kupa, BUT, just after the 1 year mark passed, the 
>> control box began to act up....it would speed up without my 
>> assistance. I sent it in to be repaired. They said  it wasn't a 
>> control box issue...the file needed  cleaning...so I paid $60 for 
>> maintenance. Now, 6 months later, the control box is stuck on the 
>> highest speed and I can't get  it to slow down! What a PITA.....
>>  
>> Marsha McDonald Rubino
>> GIMME NAILS @ the Devonshire
>> 37 Fifth St. E. Suite 102
>> Kalispell, Montana 59901
>> [email protected]
>>
>>
>> ------------------------------------------------------------------------
>> *From:* Mary Thorsfeldt <[email protected]>
>> *To:* [email protected]
>> *Sent:* Tuesday, June 16, 2009 10:27:37 PM
>> *Subject:* NailTech:: Re: has any tried foredom tools for filing
>>
>>
>>
>> I love my Vicki Peters e-file!  I have used it for 2 going on 3 
>> years, dropped hand piece several times.  Still works like a charm.  
>> You cannt hardly hear it that it is on.  Balances nice in my hand.   
>> ( :  Mary
>>
>>
>>
>> -----Original Message-----
>> *From: *"Pati" [[email protected]]
>> *Date: *06/16/2009 04:40 PM
>> *To: *[email protected]
>> *Subject: *Re: NailTech:: Re: has any tried foredom tools for filing
>>
>> hmmm holly,
>>  I probably should NOT say this but...my original KUPA (is it 200??) 
>> is about at least 15 years old and has been in to be repaired ONCE! 
>> about 8 years ago...that is when i bought the other one 
>> (2500?)...which needed repair within the first year but has been fine 
>> since!  So I would defintely recommend a KUPA again....
>>
>>  Pati
>>
>> When life gives you a hundred reasons to cry...
>> Show life that you have a thousand reasons to smile....
>>
>> -----Original Message-----
>> From: holly cliffe <[email protected]>
>> To: [email protected]
>> Sent: Mon, Jun 15, 2009 12:00 pm
>> Subject: NailTech:: Re: has any tried foredom tools for filing
>>
>>  Simmy  Since is Aseptico manufactures dental drills, I use one of their   
>> dental engineers.  It looks like this piece is still under warranty,   in 
>> which case they will replace it.  I love the design and comfort of   this 
>> handpiece, it's very similar to the Erica's.  It balances very   well in my 
>> hand, no vibration.  However, it clearly isn't standing up   to the wear and 
>> tear of a busy nail business.  I have looked at the   Kupa and Medicool 
>> online and am not sure if the handpiece is as well   designed.  I'm starting 
>> to think it might be wise to go with a less   expensive machine, so I can 
>> just buy a new one of every two   years.....these repairs sometimes cost as 
>> much as the new equipment.    As mentioned in the earlier
>>  email, I was very
>>  happy with the Erica,   but servicing it became a problem up here in 
>> Canada.  I couldn't get   parts to repair it so I had to buy a new machine 
>> (hence the   Aseptico), but it did last for 5 years.  Which e-files do you 
>> recomend?  I thought that the "craft tools" would be a problem with 
>> vibration,   just thought I'd throw it out there because those Foredom tools 
>> are   pretty rugged and will last decades.  Holly Cliffe Vancouver, BC 
>> [email protected]   On 15-Jun-09, at 7:43 AM, [email protected] wrote:  > Hi 
>> Holly, > I'm an E-File Educator for Vicki Peters. > The type of tool you 
>> mentioned is considered a "craft" tool. These   > tools were not made for 
>> use on the human body. They are also not   > designed for use all day long 
>> by a nail tech. The handpiece is not   > as balanced as handpieces designed 
>> for our use. This non ergonomic   > design will most certainly increase the 
>> onset of Carpul
>>  Tunnel   > Syndrome. Also, craft tools have way too much vibration which 
>> also   > cause CTS and discomfort for the client.   For proper ergonomics,   
>> > your handpiece should have little to no vibration. > As far as your 
>> current e-files having problems, make sure you are   > sending your 
>> handpiece in every 6 months to 1 year for   > maintenance.  If you are 
>> already doing that, I suggest you lobby   > the companies for a replacement. 
>> > VERY frustrating, I know! > Who did you send the handpiece in to for 
>> repair? > Simmy > Sent from my Verizon Wireless BlackBerry > > -----Original 
>> Message----- > From: holly cliffe <[email protected]> > > Date: Sun, 14 Jun 
>> 2009 22:51:21 > To: <[email protected]> > Subject: NailTech:: has 
>> any tried foredom tools for filing > > > > > I have had an Erica's MT 20 
>> drill, 2 years with my first aseptico
>>  > handpiece and my new one year old aseptico handpiece ($350) is > breaking 
>> down now....there has to be equipment out there that is well > designed for 
>> low vibration and comfort.  I am looking at foredom > rotary tools.  There 
>> is quite a selection of flexible shaft tools > that are used for jewellry 
>> making, dentistry and wood > carving.....anyone ever used these for nails? > 
>> > Holly Cliffe > Vancouver, BC > [email protected] > > > > >    
>>
>> ------------------------------------------------------------------------
>> Make your summer sizzle with fast and easy recipes 
>> <http://food.aol.com/grilling?ncid=emlcntusfood00000003> for the grill.
>>
>>
>>
>>
>>
>>
>>
>
>
>
>
> >

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"NailTech" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to 
[email protected]
For more options, visit this group at 
http://groups.google.com/group/NailTech?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to