Interesting talk. I’ve been wanting to dive deeper into this topic for a while.
Do you all know if I can easily enable these types of OAM on my mpls pseudowire/vpls through my mpls cloud in Juniper Junos? Furthermore, can I also send some sort of OAM on my ENNI vlan subinterfaces to pump synthetic OAM pdu’s through neighboring operator clouds towards a remote nid I manage (Accedian)? This is similar to what someone previously mentioned about measuring third-party clouds that are abstracted from their point of view, but can at least get some sort of measurement. Currently, we plug in Accesian NID’s at various places in the network and run Y.1731 or RFC2544, but as I mentioned in the previous paragraph, I would like to insert points along the way in my network and furthermore through my neighboring operator clouds as well. Aaron > On Apr 30, 2025, at 7:08 PM, sronan--- via NANOG <[email protected]> > wrote: > > Take a look at TWAMP, which may solve your problems. > > Shane > >> On Apr 30, 2025, at 7:56 AM, James Bensley via NANOG <[email protected]> >> wrote: >> >> latency, and packet loss of the service, and in the case of multi-segment >> pseudowires check this e2e, and for each segment. We also wanted to provide >> link-loss forwarding for the services. Finally, we wanted to allow our >> customers to also use CFM over our service, so we used levels 0-3 >> internally, and passed levels 4-7 transparently > _______________________________________________ > NANOG mailing list > https://lists.nanog.org/archives/list/[email protected]/message/52REISY2NM4B2W64JR5G4XMPD2TUMKNC/ _______________________________________________ NANOG mailing list https://lists.nanog.org/archives/list/[email protected]/message/QNAKVJHDPVBEDC3LRKKS5WUXDMVQ6ALY/
