66.6.208.1/24, ASN is currently 11509 but I will be getting my own shortly.
Edward W. Ray -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Hannigan, Martin Sent: Wednesday, November 02, 2005 11:54 AM To: Edward W. Ray; nanog@merit.edu Subject: RE: Using BGP to force inbound and outbound routing through particular routes What's the netblock and ASN you already have? > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of > Edward W. Ray > Sent: Wednesday, November 02, 2005 2:50 PM > To: nanog@merit.edu > Subject: Using BGP to force inbound and outbound routing through > particular routes > > > > spam was a lousy name... > > -----Original Message----- > From: spam [mailto:[EMAIL PROTECTED] > Sent: Wednesday, November 02, 2005 11:44 AM > To: 'nanog@merit.edu' > Subject: FW: Using BGP to force inbound and outbound routing through > particular routes > > I recently made a request to get a cable modem connection at my home. > I went for one of those $29.95 for three month specials in case I run > afoul of some rules prohibiting what I am going to do. I already have > a multi-T1 connection with a Class C block and BGP running on my Cisco > 3640 router, and was looking to become multi-homed. The cable > connection is via bridge/DHCP cable modem, and was going to hook it up > to the Cisco 3640. > I have already > done the research and know from what block of IP addresses I will be > assigned, and the BGP route tables/peers. > > I would like to use BGP to force inbound and outbound routing only > through particular peers, Sprint (AS 1239) and UUNET (AS 701). I have > been reading "Practical BGP" by Whate, McPherson and Sangli and this > appears to be possible. However, do my adjacent routers need to > support BGP in order for this to work? Could I use other routing > protocols to accomplish this, or would this require knowledge of all > possible downstream router IP addresses? > > Edward W. Ray > > >