A few more comments. I found a link to snmp management for ospf in an archive message: http://www.cisco.com/en/US/tech/tk869/tk769/technologies_white_paper09186a00 801177ff.shtml. That may yield you the info you need for monitoring links and/or routes.
>From my other message, if you collect 1) and 3) with cricket, you can extract RTR and bandwidth data with perl from cricket's config file. I took a bit of code reverse engineering, but I managed to get some mod_perl code going to do such a thing, so it can be done. If you pull out the appropriate interface stats, you'd be able to generate your grid for 1) and 3). -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ashe Canvar Sent: Tuesday, March 28, 2006 20:07 To: [EMAIL PROTECTED] Subject: Re: Backbone Monitoring Tools Thanks for the quick responses. Perhaps I should have been more explicit. I already use "remstats" (http://remstats.sourceforge.net/release/index.html) for interface b/w monitoring. I have worked with nagios and openview int he past. I have an ospf based network. The specific monitoring problem I am trying to solve is : 1. actively test the currently active path for packet loss and transfer i.e. draw a latency grid between every datacenter and every other datacenter 2. actively detect routing changes / failover to redundant paths using traceroutes i.e. alert if SFO->CHG->NYC changes to SFO->LXE->HOU->NYC ( link state protocols suck as far as testing backup paths go) 3. actively transfer a fixed file i.e. draw a datarate grid between every datacenter and every other datacenter So, I am not looking for a generic graphing/alerting NMS. Does anyone use a specific tool that is capable of doing this ? I am in a buy vs. build debate with my boss ;) Regards, Ashe. On 3/28/06, Josh Cheney <[EMAIL PROTECTED]> wrote: > > I have had a decent amount of success with Nagios. It is not trivial > to setup, but once it is up and running, it has always handled our > dependencies and such very well. Additionally, because it calls > external programs to do the checks, it is pretty simple to write a > script that measures whatever value you would like to monitor. As I > said before, it is a pain to set up initially, but after getting it > set up, I couldn't be happier with it. > > Ashe Canvar wrote: > > Hi All, > > > > I want a simple backbone monitor for my 5 datacenters. My "backbone" > > consists of redundant IPSEC/GRE tunnnels. > > > > At the very least I want to ping, traceroute and transfer a small > > file every few minutes over all IPSEC links. I am sure there are > > products that do this already, but I am having a hard time finding any. > > > > The display format should be noc-friendly. A basic grid with > > green/red status indicators at the least. Geographical maps a plus. > > > > Do most of you use a home grown tool for this monitoring and alerting ? > > > > Regards, > > Ashe > > > > . > > > > -- > Josh Cheney > [EMAIL PROTECTED] > http://www.joshcheney.com > -- Scanned for viruses and dangerous content at http://www.oneunified.net and is believed to be clean. -- Scanned for viruses and dangerous content at http://www.oneunified.net and is believed to be clean.