_____
From: Rod Beck [mailto:[EMAIL PROTECTED]
To: Sean Donelan [mailto:[EMAIL PROTECTED], Hank Nussbacher [mailto:[EMAIL
PROTECTED]
Cc: nanog [mailto:[EMAIL PROTECTED]
Sent: Fri, 22 Jun 2007 10:14:20 -0800
Subject: RE: TransAtlantic Cable Break
Protected 10 gig waves NYC/London are extremely expensive. Say $60K or more per
month.
Not bad as DS3's between Alaska & Seattle used to cost that much.
-Dee
So it usually makes sense for the Layer 3 guys to lease diversely routed 10
gig waves and do the protection themselves using MPLS or load balancing or some
other protocol about which I know little ...
Roderick S. Beck
Hibernia Atlantic
1 Passage du Chantier, 75012 Paris
http://www.hiberniaatlantic.com
Wireless: 1-212-444-8829.
Landline: 33-1-4346-3209
[EMAIL PROTECTED]
[EMAIL PROTECTED]
``Unthinking respect for authority is the greatest enemy of truth.'' Albert
Einstein.
-----Original Message-----
From: [EMAIL PROTECTED] on behalf of Sean Donelan
Sent: Fri 6/22/2007 4:56 PM
To: Hank Nussbacher
Cc: nanog
Subject: Re: TransAtlantic Cable Break
On Fri, 22 Jun 2007, Hank Nussbacher wrote:
>> Tell that to the 10 gig wave customers who lost service. Very few cable
>> systems provide protection at the 10 gig wave level.
>
> If you don't pay the extra amount for a protected circuit, why should your
> circuit get protection for free when others have to pay for it? Now, if
> there are 10G customers with protected circuits who lost service, then
> hopefully they have in their contract hefty penalty clauses against the
> carrier. If not, then they are just plain stupid.
Is paying for "protected circuits" actually worth it. Or are you better
off just buying two circuits and using both during normal conditions.
Use switching at layer 3 to the remaining circuit during abnormal
conditions. Most of the time, you get twice the capacity for only twice
the price instead of a "protected circuit" where you only get the once
the capacity for twice the price.
Of course, there is still the problem some facility provider will "groom"
both your circuits on to the same cable. If you are buying pre-emptable
circuits, hopefully you understand what that means.
