> -----Original Message----- > From: Petri Helenius [mailto:[EMAIL PROTECTED] > Sent: Thursday, March 13, 2008 3:49 PM > To: Michael K. Smith - Adhost > Cc: Mohacsi Janos; Matthew Moyle-Croft; [EMAIL PROTECTED]; > nanog@merit.edu > Subject: Re: IPv6 on SOHO routers? > > Michael K. Smith - Adhost wrote: > > > > It's not that bad. You can attach a v6 address to the 802.11 > interface and the FastEthernet interface, but you can't put one on a > BVI which means you need two /64's if you want v6 on wireless and > wired. > > > That workaround does not work on the models with the 4 port switch > integrated. (running 12.4T) > > Pete
Check out: http://www.andbobsyouruncle.net and my wiki post on a v6 config. I *think* this has the module you're talking about and is running flash:c870-advipservicesk9-mz.124-15.XY.bin. Cisco 871W (MPC8272) processor (revision 0x200) with 118784K/12288K bytes of memory. Processor board ID FHK1109132B MPC8272 CPU Rev: Part Number 0xC, Mask Number 0x10 5 FastEthernet interfaces 1 802.11 Radio 128K bytes of non-volatile configuration memory. 24576K bytes of processor board System flash (Intel Strataflash) Regards, Mike
PGP.sig
Description: PGP signature