On Tue, 13 Aug 2019 at 19:23, Javier J <jav...@advancedmachines.us> wrote:
> I'm working with a client site that has been hit twice, very close by > lightening. > > I did lots of electrical work/upgrades/grounding but now I want to focus > on protecting Ethernet connections between core switching/other devices > that can't be migrated to fiber optic. > > I was looking for surge protection devices for Ethernet but have never > shopped for anything like this before. Was wondering if anyone has deployed > a solution? > They don't have a large presence on site (I have been moving all of their > core stuff to AWS) but they still have core networking / connectivity and > PoE cameras / APs around the property. > Since migrating their onsite servers/infra to the cloud, now their > connectivity is even more important. > The correct answer is use fiber. If you really, really can't then APC make a single port transient arrestor p/n PNET1GB. I've used these in the past for a PoE phone in a wooden gatehouse hut right on the 100M max length with no power for active kit and they seem to work fine. I'm using one at the moment for a PoE access point in my garden shed. Not sure I would bring an inter building link in copper onto an expensive core switch though. Don't know of anything in higher density than "one port". -- Rob Pickering, r...@pickering.org