Hi,
That happened to me more often with the DAC cables I had the
displeasure to deal with.
And yeah got old valve gap feeler gauge to the rescue =D
-----
Alain Hebert aheb...@pubnix.net
PubNIX Inc.
50 boul. St-Charles
P.O. Box 26770 Beaconsfield, Quebec H9W 6G7
Tel: 514-990-5911 http://www.pubnix.net Fax: 514-990-9443
On 4/23/21 11:51 AM, Ryland Kremeier wrote:
Hit the wrong reply button before, but we were able to get it removed
by unscrewing the top latch and removing that first at an angle. Then
the connector was able to be pulled straight out. Plastic was very
thin on the pull tab and it snapped without much resistance.
Thank you,
-- Ryland
*From: *Eric Litvin <mailto:e...@lumaoptics.net>
*Sent: *Friday, April 23, 2021 10:49 AM
*To: *Joe Klein <mailto:joe.kl...@mischoice.com>
*Cc: *nanog@nanog.org <mailto:nanog@nanog.org>
*Subject: *Re: Broken Mini-SAS cable removal?
Joe’s response is spot on. I would also suggest you look at the
“latching finger” mechanism on a spare, then apply some of the
techniques Joe suggests.
Eric
Luma optics
Sent from my iPhone
> On Apr 23, 2021, at 8:27 AM, Joe Klein <joe.kl...@mischoice.com> wrote:
>
> Try shim stock or a feeler gauge between the plug and socket to
work the latching fingers. This isn't something that I've tried
specifically in this case.
>
> You might need to put a notch in the stock or feeler gauge so that
you can work the fingers from the backside. Kinda like that old trick
of using a credit card to prise a door latch, except this should work
since there's no deadlatch. :)
>
> You might also try gently twisting a small screwdriver or spudger
stick between the plug and socket too to increase the gap between the
socket and plug.
>
> -joe
>
> From: NANOG <nanog-bounces+joe.klein=mischoice....@nanog.org> On
Behalf Of Ryland Kremeier
> Sent: Friday, April 23, 2021 09:31
> To: nanog@nanog.org
> Subject: Broken Mini-SAS cable removal?
>
>
> External Mail
>
> Anyone here have experience removing a mini-SAS cable when the
plastic tab has broken off? Tried checking online but couldn't find
anything.
>
> Thank you,
> -- Ryland
>